MMotors JSC ECO-FRESH 01 LUX Installation Instructions

MMotors JSC ECO-FRESH 01 LUX Installation Instructions

Heat recovery ventilation unit

Advertisement

Quick Links

HEAT RECOVERY VENTILATION UNIT
ECO-FRESH 01 LUX
INSTALATION INSTRUCTIONS
АB 57
ISO 9001:2008

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECO-FRESH 01 LUX and is the answer not in the manual?

Questions and answers

Summary of Contents for MMotors JSC ECO-FRESH 01 LUX

  • Page 1 HEAT RECOVERY VENTILATION UNIT ECO-FRESH 01 LUX INSTALATION INSTRUCTIONS АB 57 ISO 9001:2008...
  • Page 2 IMPORTANT • Switch off mains supply before making any electrical connections or maintenance. If in any doubt contact a qualified electrician. • The appliance is not intended for use by children or persons with reduced physical, sensory or mental capabilities without being given supervision. •...
  • Page 3 * The elaboration of a ventilation system, adjusted to other than the above wall thickness is possible by a clients request. CAUTION: only AIR FLOW must be used with working fireplace. From producer: With unlit fireplace “Eco-Fresh 01 LUX" is recommended to work in AIR FLOW mode at first speed 24 hours a day.
  • Page 4 The airflow system ”Eco-Fresh 01 LUX” is composed of: Abb. 1 / Remote control 1. Outer protective grille– protects the system from humidity even during heavy rains. 2. Extensible air funnel – allows regulation of the system length, depending on wall thickness.
  • Page 5 LIGHT EMITTING DIODES Green diode · when is not lit the system does not work (or work as a fan) Air Flow · when it is lit: - the system is in mode Air Flow - if flashes the system is in mode Air Flow Red diode ·...

Table of Contents