Advertisement
Quick Links
Item Checklist
-
Roman Blind
-
Brackets & Screws
-
Child Safe device
It is important to securely attach the brackets to the mounting surface. To achieve this the
included screws must secure into wood studs, otherwise a fastener is required for secure
mounting (not included) Make sure the fastener you purchase is suitable for the weight of
the product.
Plaster
-
Use the provided
screws
-
If no solid
mounting point,
we recommend
Ramset 10mm
Hollow Wall
Anchors (not
supplied)
Installing Roman Blinds (Cord Operated)
Fixing Type
Timber
-
Use the provided
screws
Tools Required
-
Cordless Drill (with Hammer
capability if masonry wall)
-
#2 Phillips Head drill bit.
-
Metal Tape Measure
-
Pencil
Concrete, Brick or Stone
-
-
-
-
(These items need to be
purchased separately)
Use the provided
screws
50mm Red Wall
Plugs
5.5mm Masonry
Hammer
Advertisement
Summary of Contents for Baha Cord Operated Roman Blind
- Page 1 Installing Roman Blinds (Cord Operated) Item Checklist Tools Required Roman Blind Cordless Drill (with Hammer Brackets & Screws capability if masonry wall) Child Safe device #2 Phillips Head drill bit. Metal Tape Measure Pencil Fixing Type It is important to securely attach the brackets to the mounting surface. To achieve this the included screws must secure into wood studs, otherwise a fastener is required for secure mounting (not included) Make sure the fastener you purchase is suitable for the weight of the product. Plaster Timber Concrete, Brick or Stone Use the provided Use the provided Use the provided screws screws screws If no solid 50mm Red Wall mounting point, Plugs we recommend 5.5mm Masonry Ramset 10mm Hammer Hollow Wall (These items need to be Anchors (not purchased separately) supplied)
- Page 2 Cord Operated Roman Blind – Timber Head Rail Positioning Brackets The position of the brackets will be determined from the height of the blind where you measured. Check the Drop (mm) that you ordered; then measure up from this location and make a mark. Fix your bracket 20mm below this mark. This will allow for the Head rail of the blind to sit on top of the bracket. Position the outer brackets approximately 50mm in from the edge of your blind, making sure to avoid pulleys and control mechanisms. Space central brackets evenly across the width of the blind. Positioning the Blind Important - Make sure your hands are clean before touching the blind. Lift the Roman Blind into place by sitting it on to the top of the bracket. Position the blind so it is sitting evenly on the brackets and central to the window. Do not attempt to lift wide widths without fully supporting the headrail. Failure to do so may result in the headrail breaking. Starting at the central bracket, drill a screw upwards through the bracket directly into the headboard of the blind as shown...
- Page 3 Your blind is now professionally installed and you just saved on the installation expense! BAHA offer a 5-year warranty on your new blinds. Please see further details on our webpage. Handy Hints · When installing large blinds, it helps to have someone support the blind when lifting onto the brackets. This also helps prevent the head-rail from breaking and voiding the warranty. · To clean regularly dust with feather duster or brush attachment on vacuum. · To remove marks, we recommend Chux Magic Erasers. Making sure not to scrub hard at the cloth. Operation of Blind Cord & Cleat— Secure the blind at the desired height by winding the cord around the cleat. To ensure the blind is level make sure to hold tightly to all cords when operating. Do not leave cords hanging in reach of children, always hook the acorn onto the cleat when not in use. Cord lock– To operate the blind, release the blind by tugging the cord downward, then lower/raise the blind to the de- sired height. Lock into place by tugging the cord downward. Wind cords around cleat to keep out of harms way when blind not in operation. When operating your blind make sure not to lift the blind too high when locking into place, as this will not leave any cord to release the locking motion with, and will result in the blind jamming. If this does occur, hold the pack out hori- zontally, taking the weight off the blind and gently pull the cord to unlock. For further information please contact our customer service team Monday to Friday 9am to 5pm Phone: 1800 039 171 or Email: sales@baha.com.au...