Table of Contents
Advertisement
Basic Functions
Watching a Movie
You can play video fi les stored in the iPod player
by connecting it to the product.
1.
Connect the iPod dock connector to the
iPod Jack on the rear panel of the product.
2.
In the iPod screen, move to Settings >
Videos, then set the TV Out option and the
TV signal.
3.
Place the iPod in the supplied iPod Dock.
•
"iPod" message appears on the TV screen.
4.
Press the RED(A) button.
5.
Press the ▲▼ buttons to select iPod, then press
the ENTER button.
6.
Press the ◄► buttons to select Videos, then
press the ENTER button.
7.
Select the video fi le to play.
- You can use the remote control or the
product to control simple playback functions
such as the PLAY, PAUSE, STOP, # /$
and / buttons. (See page 15.)
iPod/iPhone models that can be used
with this product
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod touch (1st generation)
iPod classic
iPod with video
iPod with dock connector
iPod with Click Wheel
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano (1st generation)
iPhone 3GS
iPhone 3G
iPhone
54
English
HT-C6800_ELS_0914.indd 54
HT-C6800_ELS_0914.indd 54
✎
NOTE
You must have the VIDEO output (Composite)
connected to your TV to view iPod video (See
page 21).
If you want to iPod video via VIDEO output, set
Anynet+(HDMI-CEC) to off.
No other screen than the playback one will
appear on the TV screen. Check other screens
on the iPod player.
If the connected iPod does not support video
playback, the "Cannot play video fi les saved on
this iPod" message appears when you select the
Video menu.
Apple is not responsible for the operation of this
device or its compliance with safety and
regulatory standards.
2010-09-14
2010-09-14
9:56:28
9:56:28
Advertisement
Table of Contents
