Advertisement
Installation & Operating
200-PV-9 Pressure / Vacuum
Relief Cap for Mobile Fuel Tanks
For Sales and Service Contact
USA:
Dixon Bayco USA
Chestertown, Maryland
Phone: 410-778-2000
Fax: 410-778-4702
Toll Free: 800-355-1991
E-mail: dixonbayco@dixonvalve.com
Europe:
Dixon Group Europe Ltd
Preston, England
Phone: +44 (0)1772 323529
Fax: +44 (0)1772 314664
E-mail: enquiries@dixoneurope.co.uk
Mexico:
Dixva, S. de R.L. de C.V.
Monterrey, N.L
Phone: 01-800-00-DIXON (34966)
Fax: 01-81-8354-8197
E-mail: contactenos@dixonvalve.com.mx
Instructions
For
Dixon Bayco
dixonvalve.com
Canada:
Dixon Group Canada Limited
Innisfil (Barrie), Ontario
Phone: 705-436-1125
Fax: 705-436-6251
Toll Free: 877-963-4966
E-mail: isales@dixongroupcanada.com
Asia Pacific:
Dixon (Asia Pacific) Pty Ltd Wingfield,
South Australia
Phone: +61 8 8202 6000
Fax: +61 8 8202 6099
E-mail: enquiries@dixonvalve.com.au
Advertisement
Table of Contents
Related Manuals for Dixon Bayco 200-PV-9
Summary of Contents for Dixon Bayco 200-PV-9
- Page 1 Installation & Operating Instructions Dixon Bayco 200-PV-9 Pressure / Vacuum Relief Cap for Mobile Fuel Tanks For Sales and Service Contact USA: Canada: Dixon Bayco USA Dixon Group Canada Limited Chestertown, Maryland Innisfil (Barrie), Ontario Phone: 410-778-2000 Phone: 705-436-1125 Fax: 410-778-4702...
- Page 2 200-PV-9 Pressure / Vacuum Relief Cap for Mobile Fuel Tanks 877.582.3569 200-PV-9...
- Page 3 The 200-PV-9 also has a built in vacuum relief valve which is designed to open at 1" Hg, this allows air to enter the tank when the pump is operating.
- Page 4 Maintenance and Inspection Dixon Bayco pressure / vacuum relief caps are tested at the factory and are in proper working condition when shipped. Pressure / vacuum relief caps are designed to be tough and to provide long...
- Page 5 200-PV-9 Pressure / Vacuum Relief Cap for Mobile Fuel Tanks Assembly should follow the reverse procedure for disassembly, ensuring that the valve plate (2) slides freely in the bore of the valve body (1). If the valve plate does slide freely check for wear between the mating components and / or lightly grease.
Need help?
Do you have a question about the 200-PV-9 and is the answer not in the manual?
Questions and answers