Related Manuals for CHIYU BF-450
Summary of Contents for CHIYU BF-450
- Page 1 BF-450(M)/BF-430/BF-431 RS232/RS485/RS422 to TCP/IP Converter Module Quick Start Guide 2003...
-
Page 2: Table Of Contents
The information in this document has been carefully checked and is believed to be correct as of the date of publication. Chiyu Technology Co., Ltd. reserves the right to make changes in the product or specification, or both, presented in this publication at any time without notice. -
Page 3: Hardware Installation
CHIYU TECHNOLOGY CO., LTD h t t p : / / w w w . c h i y u - t . c o m . t w 1. Hardware Installation Socket Type Front Rear 64 NC 64 NC... -
Page 4: Setting Up Your Computer's Ip Address
Your computer must have an Ethernet card and TCP/IP installed. TCP/IP should already be installed on computer using Windows 98/2000/XP and later operating systems. Note: Connect a computer to BF-450(M)/BF-430/BF-431 Ethernet port directly should be with crossover Ethernet cable, if both connect to hub/switch should be with straight-through Ethernet cable. - Page 5 CHIYU TECHNOLOGY CO., LTD h t t p : / / w w w . c h i y u - t . c o m . t w 2. For Windows 98 and Millennium On the “Configuration” tab (if using Windows 98 and Millennium PCs), select the TCP/IP line for the applicable Ethernet adapter.
- Page 6 CHIYU TECHNOLOGY CO., LTD h t t p : / / w w w . c h i y u - t . c o m . t w In the “Local Area Connection Status” window, click the “Properties” button then your Network window will appear.
-
Page 7: Using Ip Search Utility To Set Bf450(M)/Bf430/Bf431'S Ip Addresses
CHIYU TECHNOLOGY CO., LTD h t t p : / / w w w . c h i y u - t . c o m . t w 5. Highlight “Microsoft” under the list of manufacturers. Double-click “TCP/IP” from the list on the right or highlight “TCP/IP”... - Page 8 192.168.168.125) in the “IP Address” location (where xxx is a number between 1 and 254 used by the High-Performance BF-450(M)/BF-430/BF-431 to identify each computer), and the default “Subnet Mask” “255.255.255.0”. Note that no two computers on the same LAN can have the same IP address.
- Page 9 “IP Address” location (where xxx is a number between 1 and 254 used by the High-Performance BF-450(M)/BF-430/BF-431 to identify each computer), and the default “Subnet Mask” “255.255.255.0”. Note that no two computers on the same LAN can have the same IP address.
-
Page 10: Configure Your Bf-450(M)/Bf-430/Bf-431
3. Configure your BF-450(M)/BF-430/BF-431 1. Open your web browser and type http://192.168.168.125 in the browser’s address box. This address is the factory set IP Address of your BF-450(M)/BF-430/BF-431. Press “Enter”. 2. The “Username and Password required” prompt box will appear. Typing “admin”... -
Page 11: Troubleshooting
/ BF-430 / BF-431 and your computer. computer on the Verify that the IP address and subnet mask of the BF-450(M) / BF-430 / BF-431 and computer are in the same IP address range. Check the Serial cable connection between BF-450(M) / BF-430 / BF-431 Can not access and your device. -
Page 12: Appendix A. Bf-450(M)/Bf-430/Bf-431 Default Value Setting
CHIYU TECHNOLOGY CO., LTD h t t p : / / w w w . c h i y u - t . c o m . t w Appendix A. BF-450(M) / BF-430 / BF-431 Default Value Setting Serial Working Mode...
Need help?
Do you have a question about the BF-450 and is the answer not in the manual?
Questions and answers