AARC TECHNOLOGIES Aarcantennas MKT20-V100 Installation Instructions

Installation Instructions Installation Instructions
Refer to the Parts Table below to check the all mounting kits are included
serious physical damage on the parts to avoid any installation failed. serious physical damage on the parts to avoid any installation
Notice:
All the work on installation, maintenance, or removal
qualified with experienced personnel. experienced personnel. It recommends that keep a check on the Antenna Systems
once a year to ensure the orientations and connections are work as normal. once a year to ensure the orientations and connections are work as normal.
Caution:
1. Do not install near the Power
2. Do not install it in the wet-day, windy day, either lightning or thunder, do not use a metal
ladder at the same time.
3. It strongly recommends when working on installation that wearing a pair of shoes
soles and heels, protective clothing with a long-sleeve and rubber gloves. soles and heels, protective clothing with a long
www.aarcantennas.com
Specifications may change at any time without notice.
below to check the all mounting kits are included; check if there is a below to check the all mounting kits are included
installation, maintenance, or removal to the antenna system is
It recommends that keep a check on the Antenna Systems
ower Lines or Guy Wires to prevent getting an electric shock. or Guy Wires to prevent getting an electric shock.
day, windy day, either lightning or thunder, do not use a metal day, windy day, either lightning or thunder, do not use a metal
when working on installation that wearing a pair of shoes with rubber when working on installation that wearing a pair of shoes
Mounting Hardware Mounting Hardware
NO. Name
1 Antenna pivot arm Antenna pivot arm
2 Bracket Bracket 1
3 Bracket Bracket 2
4 Mount clamp Mount clamp
5 Calibration Tablets alibration Tablets
6 M12×1 M12×130 Bolt
7 M12 Hex Nut M12
8 φ12 2 Flat Washer
9 φ12 Sp Spring Washer
10 M10×25 Bolt M1
11 M10 Hex Nut M10 Hex Nut
12 φ10 0 Flat Washer
13 φ10 Sp Spring Washer
14 M12×180 Bolt M12×1
15 M M8×35 Bolt
16 M M8 Hex Nut
17 Φ8 Flat Washer
18 Φ8 Sp Spring Washer
system is required by
©Copyright AARC TECHNOLOGIES TECHNOLOGIES CO., LTD., All Rights Reserved.
MKT20-V100
Qty
2
1
1
4
1
4
20
16
16
4
4
4
4
4
2
4
2
2
12AUG2015