Intended use ..................4 What is included ................4 Installation ..................4 2 Operation ..................5 Powering On & Off ................5 Flashing LEDS ..................5 Using the WRITE function ..............5 3 Panel description ................6 4 Specifications ..................7 DT-200 MANUAL...
DTRONICS Document revisions Date Version Change 23-10-2019 R1.0 Initial document Changes dimensions and weight and some 25-10-2019 R1.1 typos DT-200 MANUAL...
Setup Intended use The DT-200 is intended to create new sounds for your synthesizer. The DT-200 v3 is a programmer for the JX-3P and the MKS-30 but will also work with Roland's GR-700 Guitar Synth. What is included Please ensure that your DT-200 includes the following: •...
If the red VCA-MODE LED and MANUAL LED both flash, there is no communication with the synthesizer, this can be a defective cable or defective synthesizer. Using the WRITE function A WRITE button is not present on the DT200. To write patches to memory, use the WRITE button on the synthesizer. DT-200 MANUAL...
Source mix Cutoff Frequency Cutoff Frequency jack DIN6P Resonance ENV Modulation Dimensions Polarity 200(W) 150(D) x 50(H)mm LFO Modulation Pitch Follow Weight 0.61 kg Mode (ENV, Gate) Accessories Level DIN cord (DIN6P) Specifications are subject to changes without notice DT-200 MANUAL...
Need help?
Do you have a question about the DT-200 and is the answer not in the manual?
Questions and answers