Setting Up the Display Options
1 With the unit in Stop mode, press the MENU button.
2 Select DVD using
,
❷
button.
Setup
Setup
Display Setup
Setup
3 Select Display Setup using
❿
press the OK or
button.
4 Use the
,
buttons to select the desired item.
❷
❿
Then press the OK or
TV Aspect
Black Level
NTSC Disc Output
DVD Out
❿
buttons, then OK or
:
,
buttons, then
❷
button.
Display Setup
: 4:3 L-Box
: PAL60
: RGB
TV Aspect
Depending on the type of television you have, you
may want to adjust the screen setting (aspect ratio).
1. 4:3 Letter Box : Select when you want to see
2. 4:3 Pan Scan :
3. 16:9 Wide :
Black Level
Adjusts the brightness of the screen.(On/Off)
NTSC Disc Output
"NTSC" if the screen only has one NTSC-video
entrance. If this is not the case, you can choose
to leave " PAL60" as is.
DVD Out
RGB :
Sends RGB signal from the AV JACK
(SCART terminal).
S-Video :
Sends S-VIDEO signal from the AV
JACK (S-Video terminal).
Video :
Sends COMPOSITE VIDEO signal
from the AV JACK (SCART terminal).
ENG-31
the total 16:9 ratio screen DVD
supplies, even though you have
a TV with a 4:3 ratio screen.
Black bars will appear at the top
and bottom of the screen.
Select this for conventional size
TVs when you want to see the
central portion of the 16:9
screen. (Extreme left and right
side of movie picture will be cut
off.)
You can view the full 16:9
picture on your widescreen TV.