INDUSTRIAL WATER EQUIPMENT Ultraviolet Water Purification System Instruction Manual

Name: Ultraviolet Water Purification System
Applications: Drinking water, Rainwater from water tank, medical and industrial etc.
The SPS range is a combined filtration and UV water disinfection treatment system able to remove impurities
and safeguard your tank water supplies against bacteria, viruses and pathogens. With 4 models in the range, the
SPS-series provides safe, potable water for small, medium and large houses. It can also be used in any other water
treatment application where the combination of pre-filtration and UV water disinfection is required.
Complete Water Treatment is achieved in 3 steps
Coarse Filtration – Removes impurities and sediment larger than 20 microns.
1.
Fine Filtration – Removes impurities and sediment over 1 micron, removes parasitic cysts like Giardia and
2.
Cryptosporidium.
UV Disinfection – Inactivates pathogens, bacteria, and viruses.
3.
Input: 110V to 220V 50/60Hz
○ Reactor Chamber (304SS)
1
○ Quartz Tube
2
○ O-ring
3
○ Open End Nut
4
UV Lamp
○
5
○ 4-pin Electrical Socket
6
○ Screw Hole
7
○ Cover Cap
8
○ Earth Lead
9
○ Spring
10
- 1 -