Panlux PN15300004 Instructions page 3

MODEL: PN15300004
PN15300005
ENG |
INSTRUCTIONS
Before using or installing the light fixture, kindly read the instructions and follow safety rules.
Installation should be provided by qualified person or company.
Thank you for choosing the item of company PANLUX s.r.o.
Notice
Before using, check the product and make sure there is no damage, otherwise do not use it.
Before any manipulation assure that mains electrical supply is disconnected.
In case of damage do not repair or disassemble the product.
5V | 500mA USB output to recharge various mobile devices.
Single-use battery is included. Before first using, remove safety strip from battery.
LEDs are not replaceable.
Infringement of any instruction mentioned in instruction manual can cause harm to health or property.
Accessories
Adaptor 230V~50Hz → 5V DC | 500mA, USB cable (80cm)
If the product is mechanically damaged or connected unprofessionally, guarantee cannot be allowed.
Installation
1 2
182mm
182mm
182mm
42mm
18
230V
1,5W IP20
5V DC
LED
3
110
Ra
4000K
lm >80
FUNCTIONS
ON | OFF
switching
ON | OFF /min. 3s
dimming the light
4
5V DC | 500mA
4x
80cm
230V~50Ηz
5V DC | 500mA
5V DC | 500mA
230V~50Ηz
All rights reserved.
USB LED
Li-Ion
15 000x 0,250kg
3,7V | 800mA
30 000h/St
SET - UP | DOWN - SET
time setting (min, hour, day, month, year)
UP
format setting 12/24 H
MODE - SET - UP | DOWN
alarm setting
The alarm rings 1 minute. After the time for re-ringing (1-60 min) alarm will ring
again, press any key to turn off the alarm.
MODE - 3x SET - UP | DOWN - MODE
setting the interval for re-ringing
4x SET - UP | DOWN - MODE
melody setting
DOWN
temperature setting (°C, F)
battery
CR2025/3V
5
ON | OFF
Technical data can be changed without previous noticement.
4-5h/St 6-7h/St
UM_USB_140304