Advertisement
6. Remove the levelling feet from anotherside of the
unit bottom and transfer it to the corresponding position
on the opposite side of the unit bottom.
7. Reattach the bottom screws, bottom hinge and
levelling feet to the opposite side of the unit bottom.
Loosely secure.
screw
screw
8. Carefully set the door back into place.Install the
upper hinge and screws. Ensure the door is aligned
horizontally and vertically so that the seals are
closed on all sides before finally tightening the upper
hinge.Use a spanner to tighten it if necessary.
9. Put the top cover back and fix it in place with the screws.
10. With the door closed, check that the door is aligned
horizontally and vertically and that the seals are closed on
all sides before finally tightening the bottom hinge.
Re-adjust the levelling feet as needed.
Advertisement
