NeedforSeat MAXNOMIC Assembly Instructions Manual page 12

1
Before you take the chair out of the box, pull the
armrests into their highest position first.
3
Here we go! Start with the backrest. We have already
pre-assembled four screws for you.
5
Do exactly the same with the other side of the backrest.
12
2
Unpack the contents of the box. Tip: Use the foam
packaging to protect any damageable floor.
4
Remove the pre-assembled M8 screws of the backrest.
6
DO NOT use this lever before the backrest has
been assembled! RISK OF INJURY !!!