Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for TFortis SG-Cam
- Page 1 Operating Manual SG-Cam Surge protection unit for video cameras Version 1...
- Page 2 Grounding of the switch is obligatory. It is recommended to check the integrity of lightning protection device at the beginning and the end of the storm season and immediately after the storm.
-
Page 3: Table Of Contents
Contents Contents ..................... 3 1. Purpose ....................4 2. Description ..................... 5 3. Technical parameters ................7 4. Operating conditions ................8 5. Installation ....................8 5.1. Installation on the wall or pole ............8 5.2. Pulling cables through the cable gland ..........9 5.3. -
Page 4: Purpose
TFortis SG-Cam is a lightning protection device designed to protect cameras through the Ethernet port from strong interferences induced by powerful lightning discharges. It is recommended to use TFortis SG-Cam in conjunction with a lightning protection device for TFortis SG-Switches . Figure 1. Typical application scheme Features ... -
Page 5: Description
2. Description Figure 2-1. Appearance of TFortis SG-Cam SG-Cam device has a metal enclosure protected from dust and moisture according to IP67 . The device has a cable gland with a rubber sleeve for three cables: Ethernet cable from the switch, ... - Page 6 Figure 2-2. Device interior Figure 2-3. Example of connection...
-
Page 7: Technical Parameters
3. Technical parameters General features Power supply IEEE802.3af/at (up to 60W) Data transfer type 10/100/1000Base-T Degree of protection from dust and IP67 moisture Operating temperature, °C - 55...+80 Dimensions, mm 220x120x90 Weight, kg <2 Characteristics according to GOST IEC 61643-21 - 2014 (1-2), (3-6), (4-5), (7-8) (1,2-3,6), (4,5-7,8) Protected pairs... -
Page 8: Operating Conditions
4. Operating conditions TFortis SG-Cam is designed for 24/7 outdoor operation at the ambient temperatures from minus 55C to plus 80C. It is recommended to check the integrity of lightning protection device at the end of the storm season and immediately after the storm. -
Page 9: Pulling Cables Through The Cable Gland
WARNING! Drilling of the housing will lead to loss of device integrity and, as a result, loss of product warranty. 5.2. Pulling cables through the cable gland Cut the hole in the rubber sleeve Pull the cables through the cut... - Page 10 Assemble the cable gland according to the Figure below Tighten the cable gland...
-
Page 11: Cable Connection
5.3. Cable connection Connect the cable coming from the switch to RJ45 «SWITCH» port. Connect the cable coming from the video camera to RJ45 «CAMERA» switch. If the cable from the video camera ends with a plug, make an Ethernet cable of a minimum length and use it to connect the video camera. -
Page 12: Supply Scope
Figure 5.3-1. Connection scheme It is recommended to use a 4-pair twisted pair, at least category 5. Figure 5.3-2. Separation of the Ethernet cable. 6. Supply scope... -
Page 13: Manufacturer's Warranty
Name Note TFortis SG-Сam Bracket M5 screw Cable gland MG32 Rubber sleeve Product certificate Packaging 7. Manufacturer's warranty The warranty period for the switch is 36 months from the date of sale. Only a complete switch is accepted for servicing and repair.
Need help?
Do you have a question about the SG-Cam and is the answer not in the manual?
Questions and answers