Advertisement
ASCEND
2 Attach 2 strap brackets to back of the top shelving unit with 2 short screws. Secure with a phillips head screwdriver.
WALL MOUNTING INSTRUCTIONS
These instructions are for drywall mounting only.
For safe installation it is essential to use hardware
appropriate for your wall type. Mount to wood wall
studs whenever possible. If you are unsure of what
type of fasteners to use, consult your local hardware
store or a qualified professional. This product is only
deterrent, it is not a substitute for proper adult
supervision.
A. With the assistance of another adult, place the unit in
desired location against the wall. Mark the location of the
strap brackets installed in Step 2 on the wall. Move the
unit out of the workspace.
B. Drill 2 - 1/4"diameter holes at each mark on the wall.
Insert 1 drywall anchor into each hole and gently tap with
a hammer until flush with the wall surface.
C. Insert 1 long screw through each strap bracket and
into the drywall anchor. Secure, but do not over tighten
with a Phillips head screwdriver.
D. Place the shelving unit back into position against the
wall and thread the wall strap through both brackets and
pull until tight.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Made in Indonesia - r04
WIDE STACKING SHELVES WITH DOORS
Customer Service 800.967.6696 | www.crateandbarrel.com
D
C
A, B
Page 2 of 2
Advertisement
