Malfunctions - FireWare Fusion User Manual

User Manual
EN
FireWare Fusion
6. Storingen
Problems
My Fusion does not respond to my key presses.
There is interference on the audio when
listening to the Radio.
I cannot hear the audio well or at all.
The USB flash drive will not play.
I cannot easily tune the stereo to a
radio station
The Fusion-link app doesn't recognize
the Fusion
28 FireWare Fusion
Solutions
• Charge the Fusion
(Charge the fusion, page 1).
• Press and hold
the Fusion.
Press and hold
back on.
• Remove the power cable from the
stereo's power cable port,and move the
stereo away from the AC power adaptor.
• Unplug the AC power adaptor from the
wall outlet.
• Move the stereo away from other AC
power adaptors.
• Move or reorient the stereo for better
reception.
• Check the volume setting on the
connected device.
• Select a valid source for the Fusion.
• Make sure the fusion is not muted or
paused.
• Make sure the flash drive is formatted as
FAT32.
• Make sure the tracks are in MP3 format
and are saved in theroot directory..
• Use the smartphone FUSION-Link app to
navigate the USBfolders
• Make sure the music is not paused.
• Using the FUSION-Link app, press
to select the manual tuning mode
• Use the FUSION-Link app or press
and to change the tuner region if you
have traveled to a different country
• Check in settings if your device is
connected
• turn the Fusion Off and ON.
for 12 seconds to reset
to turn the Fusion
www.FireWare.nl