AAVIX AGT1321S Owner's Manual page 33

Problem
1. Engine does not start
2. Engine stops
3. Unsatisfactory result
4. Excessive
vibration/noise or
exhaust
Possible cause
1.1. Not enough fuel in
fuel tank
1.2. Spark plug is wet
1.3. Spark plug is
damaged
1.4. Spark plug
conn ector lose
2.1. Not enough fuel in
fuel tank
2.2. Cutting device is
blocked
1.1 Cutting device dull
1.2 Cutting material
exceeds capacity
1.3 Cutting height is
incorrect
4.1. Cutting device is
dull/damaged
4.2. Bolts/nuts are loosen
4.3. Petrol/oil is incorrect
Solution
1.1. Add fuel
1.2. Dry spark plug
1.3. Replace spark plug
1.4. Attach properly
2.1. Add fuel
2.2. Remove blockage
3.1 Sharpen or replace
the cutting device
3.2 Only cut m aterials
acc. to the capacity
of the product.
3.3 Adjust cutting height
4.1. Replace with a new
one
4.2. Tighten bolts/nuts
4.3. Empty out unused
petrol/oil and refill
with the correct
petrol/oil
PAGE 33