Wunda RTS80.70 Quick Start Manual

With this weekly timer, It is possible to set 6 individual on/off events per day which can be copied for all 7 days
or you can have days 1-5 the same with a different schedule for the weekends. Factory settings are programmed
for 3 events to obtain 6 you will need to set up the program by following the advanced settings information .You
THE BRAND YOU CAN TRUST
can also select the permanent "manual override mode" or the single event "comfort mode". The timer
switch is recommended for using together with a mechanical thermostat & the wiring box H-Box12.
Heating
event indicator
Time display
Day of the
weeknumber
Menu Button
Arrow Buttons
1
With this weekly timer, It is possible to set 6 individual on/off heating events per day which can be copied for all 7 days or
you can have days 1-5 the same with a different schedule for the weekends. Factory settings are programmed for 3 heating
events to obtain 6 you will need to set up the program by following the advanced settings information .You can also select
Function
the permanent "manual override mode" or the single event "comfort mode". The timer switch is recommended for using
together with a mechanical thermostat & the wiring box H-Box12.
Function
Setting the clock
Press key for 5 seconds until the day starts blinking,
On/Off
use the or key to set the day, press the
to confirm the setting and the hours will start blinking,
To turn timer switch on or off, press
use or press to confirm the setting and the
minutes will start blinking, use
Set day of the week and the time
utes, press to confirm. The timer will return to normal
working.
Press button for 5 seconds until the day starts blinking, use
the or button to set the day, press the
the setting and the hours will start blinking, use
button to confirm the setting and the minutes will start blinking,
Clock controlled program mode
The timer has the facility to operate 6 on and 6 off
events. Factory settings provide the popular 3 on and
3 off combination. Press the menu button
the clock symbol appears. The timer will now
RTS80.70 programming timer switch
RTS80.70 Programming Timer Switch
✆ 0800 5420 816
Single period manual override
use or
"comfort mode"
key
will return to normal working.
You can change from automatic to manual control
button.
for a single period ONLY when the clock symbol is
Clock controlled programme mode
showing. Press
or to set the min-
alongside the clock symbol. Press
The timer has the facility to operate 6 on and 6 off heating
heating symbol will appear or disappear. The timer will
events. Factory settings provide the popular 3 on and 3 off
reset to auto mode at the next event
button to confirm combination. Press the menu button
or press symbol appears. The timer will now automatically operate
according to the Factory programmed settings.
Key lock function
Press both the
disengage the key lock function. If the key lock symbol is
until
visible the function is ON if has disappeared it is OFF.
www.wundatrade.co.uk
Manual mode
Clock controlled
programme mode
Key lock
Heating on
On/Off Button
to set the minutes, press to confirm. The timer
or and the hand symbol will appear
again and the
.
until the clock
and together for 5 secs to engage/
E01
Manual override mode
When the clock symbol is showing the programmed timer
on and off cycles are automatically controlled.
To override and gain manual control press the menu button
until the hand symbol appears.
The timer is now in manual control. Press
heating manually on/off.
Single period manual override
"comfort mode"
You can change from automatic to manual control for a single
period, ONLY when the clock symbol is showing. Press
and the hand symbol will appear alongside the clock
symbol. Press again and the heating symbol will appear or
disappear. The timer will reset to auto mode at the next
heating event.
Key lock function
Once the timer has been set, press both the and
together for 5 seconds to display . Timer is now locked.
Repeat these steps to unlock the timer.
Revision date: 30/4/2018
to turn the floor
or
buttons