DoorKing Microplus Quick Start Manual

DoorKing's transmitters are ideal for applications that require
RF wireless access. Users can remain comfortably inside their
vehicle while activating the RF transmitter without having to
use a keypad or card reader. When activated a data stream is
sent to the remote SuperHet receiver. This data includes the
transmitter serial number, facility code, and button code. In
addition MicroPLUS transmitters have an encrypted sync-
code that changes each time the transmitter is used.
microplus / microclick - transmitters
Interference Information
This equipment may interfere with radio communications, AM/FM radio and TV
reception. Use the following suggestions to correct the interference:
• Relocate the receiving antenna.
• Increase the space between the equipment and transmitter receiver.
• Connect the equipment into another outlet, different from the transmitter
receiver.
• Consult a technician for help.
This equipment has been certified to comply with the limits for a class B comput-
ing device, pursuant to FCC Rules. To maintain compliance with FCC regulations,
shielded cables must be used with this equipment. Operation with non-approved
equipment or unshielded cables may result in interference to radio and TV recep-
tion.
This Class [B] digital apparatus meets all requirements of the Canadian Interfer-
ence-Causing Equipment Regulations. Cet appareil numrique de la classe [B] re-
specte toutesles exigences du Reglement sur le materiel brouilleur du Canada.
FCC Compliance
This device will provide reliable remote access control. Be aware of the following
limitations:
• This device complies with FCC Rules and Regulations, Part 15 and Canadian In-
terference Causing Equipment Regulations. Because of this, they have limited
transmitter power and limited range. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, (2) this device
must accept any interference received, including interference that may cause
undesired operation.
• The receiving device cannot respond to more than one transmitted signal at a
time. Radio signals near the receiver operating frequency may block the trans-
mitter signal regardless of the code setting. If this occurs, the radio receiver
may have to be repositioned.
• Any changes or modifications may void compliance with FCC Rules and Regula-
tions.