Advertisement
Quick Links
Valeo
Assembly instructions
General Product information
This product is suitable for indoor dry locations only.
This product can be dimmed with most standard dimmers.
Assembling the body
1.
Place the two wood components of the body on an ele-
vated fl at surface such as a table. Remove the cord from the
rear of the verticle body then align the two wood compo-
nents of the body as pictured on the right, making sure to
align the holes for the fasteners.
2.
With the components aligned, insert the two 5" long
1/2-13 socket head cap screws into the holes and slowly
tighten both screws using a 3/8" hex key. Assure that the
joint closes evenly.
3.
Once the joint has closed evenly, tighten the screws.
4.
With the body components now securely fastened,
press the wire and cord stock into the groove covering the
joint.
CERNOGROUP.COM
1751 MCGAW AVE, IRVINE, CA 92614
T_949.715.1534
C
COPYRIGHT 2015 CERNO LLC.
Advertisement
Summary of Contents for CERNO Valeo
- Page 1 Once the joint has closed evenly, tighten the screws. With the body components now securely fastened, press the wire and cord stock into the groove covering the joint. 1751 MCGAW AVE, IRVINE, CA 92614 COPYRIGHT 2015 CERNO LLC. CERNOGROUP.COM T_949.715.1534...
-
Page 2: Attaching The Base
Once the base is in position, insert the two 1/2-13 fl at head socket screws and tighten using a 5/16” hex key. Following the installation of the fasteners in step 6, insert the two wood screws and tighten them. 1751 MCGAW AVE, IRVINE, CA 92614 COPYRIGHT 2015 CERNO LLC. CERNOGROUP.COM T_949.715.1534... -
Page 3: Attaching The Boom
With the boom now set to the desired length, attach it using the two #8 wood screws. With the boom now fully assembled drape the cord over the roller at the end of boom arm 1751 MCGAW AVE, IRVINE, CA 92614 COPYRIGHT 2015 CERNO LLC. CERNOGROUP.COM T_949.715.1534... - Page 4 By wrapping the cord around diff erent studs, the height of the shade at can be adjusted in 8 inch incre- ments. 1751 MCGAW AVE, IRVINE, CA 92614 COPYRIGHT 2015 CERNO LLC. CERNOGROUP.COM T_949.715.1534...
- Page 5 NOTE: For uninstallation of lower diff user gently lift up one edge of the lower diff user and carefully bend the diff user until it can be removed from the bottom of the shade assembly. 1751 MCGAW AVE, IRVINE, CA 92614 COPYRIGHT 2015 CERNO LLC. CERNOGROUP.COM T_949.715.1534...
-
Page 6: Important Safety Instructions
Warranty In addition to our two year product defect warranty, Cerno off ers a repair service for the life of your product. Every Cerno product is designed and manufactured in the United States which facilitates excellent quality control and easy access to our engineers and service technicians. At Cerno we pride ourselves on delivering products executed with an unparalleled level of craftsmanship.