Morris 73220 Quick Manual

Morris 73220 Quick Manual

Motion sensor

Advertisement

Quick Links

3. Now turn the LITE control knob completely counter clock-
wise. At dusk turn the LITE control knob slowly clockwise
until the light comes on. The Light Control will now be active
only from dusk to dawn.
NOTE:
While adjusting the LITE control, you concurrently
wave your hand slowly past the lens (detect) window so as to
induce the sensor to detect motion.

AUTO MODE:

1. The sensor detects motion and turns on the lighting auto-
matically.
2. When the ON / OFF wall switch is turned ' ON ' and the
time control knob is set to the TEST position, the lamp
should have been 'ON' for 1 minute to warm up and then it
should turn off itself automatically. The light control now
goes into AUTO MODE. Walk past the detection area and
the lamp will turn on for the adjusted period of time.
The built - in photocell turns the lamp off during the day
when the LITE control knob is set at the 'MOON' position.

TROUBLE SHOOTING GUIDE

LIGHTS DO NOT COME ON AT ALL:

1.Make sure that the lamp being used is not blown or
replace a new bulb.
2.Check to see that there is power to the motion sensor.
3.Check all wiring and connections.

LIGHTS STAY ON ALL DAY AND NIGHT:

1.Switch off and on action too fast. IT takes minium 5 sec-
onds to complete the action.
2. Check all wiring and connections.
4
MOTION SENSOR TRIGGERS ON WITH MOTION
AND STAYS ON:
1. Reduce the time setting.
2. Move the halogen away from the motion sensor head.
3.Aim the motion sensor head downward slightly.

NOT ENOUGH RANGE OR TOO MUCH RANGE:

1. Your motion sensor is most sensitive to motion across its
field of view, not towards or away from it. Try to mount the
sensor's head diagonally across the area to be protected.
2. The motion sensor works best on flat terrain. Point the
head downwards for valleys, and slightly upwards for hills.
3. If there is too much range, point the motion sensor head
sharply downwards.
4. If a longer distance is required, there are two alternatives.
a.) Upgrade the mounting height of the whole unit.
b.) Adjust the motion sensor as horizontally as possible.
When the motion sensor is adjusted to the horizorital
position, you get the longest distance possible.
5
73220/73221
73220/73221
Motion Sensor
Motion Sensor
Security Light
Security Light
The 73220/73221 is a Lighting fixture with a mini
halogen lamp that may be installed indoors or
outdoors. The 73220/73221 controls the lighting to
provide convenience, security, economy and safety.
When motion sensed, the light control automatically
turns on a welcoming lamp for your family and
friends as they approach your home. lntruders are
suddenly showered with unexpected light when they
come near your home, frightens them away.
The light control also saves energy by activating
only at night and
73220/73221 provides efficient lighting control for
your benefit. This unit uses a built-in passive
infrared detector that reacts instantly to body heat
and switches on the light. After an adjustable period
of time, the light switches OFF automatically. A
built-in photocell deactivates the Motion Sensor
during daylight.
Quartz
Quartz
only
when needed.
The
A501111677R

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 73220 and is the answer not in the manual?

Questions and answers

Summary of Contents for Morris 73220

  • Page 1 ‘ON’ for 1 minute to warm up and then it The 73220/73221 is a Lighting fixture with a mini 4. If a longer distance is required, there are two alternatives. should turn off itself automatically. The light control now a.) Upgrade the mounting height of the whole unit.
  • Page 2 Figure 3 shows two installation methods either install on the ★ 2. Turn the TIME control knob to mid-position. Note how long NOTE: When mounting the 73220/73221 in uneven wall or on the ceiling. it takes for the lighting to turn OFF after motion stops.

This manual is also suitable for:

73221

Table of Contents