Penpower Technology Wireless Pen User Manual page 13

Wireless Pen
this red laser light on.
8. ID matching button: If there is more than two Wireless Pens or other
wireless devices around you and interference your writing or presenta-
tion, you may push ID matching button to match your Wireless Pen
and your wireless receiver. Please refer to 2.7 ID Code Matching for
details.
9. Power On/Off switch: While Wireless Pen is not in use, please turn the
power off to save the battery life.
10. Battery cover: Push the wedge of the battery cover upward to open the
battery cover, and put two AAA batteries in with the positive electrode
in the right side. When the electric power is insufficient, the LCD
monitor will display "Lo" in the timer screen to remind you to replace
the battery.
11. Stylus pen: Pull the stylus pen out to write or use it as a mouse. Place it
back, when you do not need to use the stylus pen.
12. Timer setting button: Let you set the presentation time. Press it once,
add 5 minutes and so on. The remaining time will display on the LCD
monitor. (See item 5)
Tip: Press and hold the [Timer setting button] for a while, you can reset
the timer.
13. Side Button (Backspace/Black screen button):
Handwriting Mode: Remove a character before the cursor.
Presenter Mode: Press this button during the presentation to display
the black screen. Press it again to display the previous screen.
14. Presenter/Handwriting mode switch: Switch up to the [Presenter
Mode]. Switch down to the [Handwriting Mode].
1-4