Maxwell WP-PD40 Instruction Manual

PA1154-01
Wireless Charger
WP-PD40
Instruction Manual
Thank you for purchasing this MAXELL product. Before use, make sure to read this
Instruction Manual and use the product correctly and safely.
Confirmation of packaged item
Included items
Main body ×1 Power cable×1
USB-A - USB Micro-B
Approx. 90cm
Protective sheet ×1 Instruction Manual (this document)
Introduction
1
Keep the following in mind when reading the Instruction Manual.
● This Instruction Manual may be subject to change without prior notice.
● In order to improve the product, external appearance or part of the specifications
may be subject to change without prior notice.
Disclaimer
(See the warranty certificate for details of the warranty.)
● We assume no responsibility for any damage caused by fire, earthquake, action
by any third party, other accidents, customer' s intention or fault, incorrect use,
or use under other abnormal conditions.
● The warranty stated in the warranty certificate is all we warrant, and we do not
warrant anything except for this warranty including express warranty and implied
warranty.
● We assume no responsibility for any damage caused by any usage not
described in this Instruction Manual.
● This product is not intended for use with equipment and devices related to
human life such as medical equipment and devices, nuclear equipment and
devices, aerospace equipment and devices, transportation equipment, and
equipment and devices which require a high standard of reliability. We assume
no responsibility if this product is used for the control systems of these types of
equipment and devices and if any injury or fire occurs due to failure of the
product.
● This product is intended for use only in Japan. We assume no responsibility for
use in any country other than Japan.
Safety precautions
2
Make sure to observe the following in order to use the product safely.
Indicates "the degree of danger in which incorrect handling
DANGER
may result in death or serious injury* 1 to a user and which
is imminent."
Indicates "the degree of danger in which incorrect handling
WARNING
1
may result in death or serious injury* to a user."
Indicates "the degree of danger or the state of damage in
CAUTION
which incorrect handling may result in slight injury* 2
user or damage to property* 3 ."
*1: Serious injury means injury with aftereffects such as loss of sight, injury, burns (high
temperature, low temperature or chemical), electric shock, bone fracture or poisoning and
injury which requires hospitalization or long-term hospital visits for medical treatment.
*2: Slight injury means injury, burns, or electric shock, etc., which does not require hospitalization
or long-term hospital visits for medical treatment.
*3: Damage to property means consequential damage related to house, household goods and
livestock or pets.
Symbol draws attention to ignition, rupture or high temperature, etc., in
handling of the product. Specific content which requires caution is drawn in the
pictorial symbol.
Symbol prohibits an action in handling of the product. Specific prohibited
content is shown in or near the pictorial symbol by picture or words.
(Example: Do Not Disassemble)
Symbol forces a user to perform an action based on the instruction in
handling of the product. Specific content forced is shown in or near the
pictorial symbol by picture or words.
(Example: Disconnect a plug from the outlet.)
DANGER
Take power only from the USB port.
When using the product, use the USB output AC adaptor.
Use of any other power exceeding the rated power may result in heat
generation, ignition, failure, electric shock or injury.
WARNING
Keep dry.
Dot not wet the product with water. Otherwise, fire or electric shock
may occur.
Do not touch the product with wet hands.
Otherwise, fire or electric shock may occur.
Do Not Touch
with Wet Hands
Do not repair, alter or disassemble the product.
Otherwise, fire, electric shock or injury may occur.
Disassemble
Disconnect the USB plug when an abnormal condition occurs.
When smoke, abnormal odor or noise emits from the product, or
when water or a foreign substance has entered inside the product,
or when the product is dropped, immediately disconnect the USB plug.
Use of the product as it is may result in fire or electric shock.
Use only the included power cable.
Otherwise, fire or electric shock may occur.
Make sure to insert the USB plug completely.
Use of the product with the USB plug incompletely inserted may result
in fire or electric shock due to contact failure.
Do not use a damaged power cable.
Do not pull forcibly, bend, damage, bind or place a heavy object on
the power cable or lay the power cable under any object.
Otherwise, flaw or disconnection of the cable may result in fire or
electric shock.
Do not place the product in direct sunlight or in a place with
abnormally high temperatures.
Do not place the product in a vehicle, in direct sunlight or near a
heating appliance. Otherwise, fire may occur.
Do not place anything other than Qi compatible devices on the product.
Otherwise, fire, electric shock or burns may occur. In particular, metallic
items may generate heat, resulting in fire or burns.
Do not sandwich any metal between the product and the device to be
charged.
Do not sandwich any metallic piece such as a clip or coin between the
product and the device to be charged.
The metallic piece may generate heat, resulting in fire or burns.
Do not attach any seal or tape to the product or the device to be charged.
Otherwise, fire, electric shock or burns may occur.
Do not cover the product with a cloth or wrap the product in a cloth.
Otherwise, heat may be trapped, resulting in fire or burns.
A person using a cardiac pacemaker should consult a doctor before
using the product.
The product may affect your cardiac pacemaker.
When using or storing the product, keep it out of the reach of children.
Otherwise, electric shock or injury may occur.
CAUTION
Do not place the product in an unstable location.
Otherwise, you may drop or step on the product, resulting in injury.
Use the product in a temperature range from 0 to 35°C.
Otherwise, burns or failure may occur.
Read the Instruction Manual of the device to be charged before using
the product.
to a
Otherwise, burns or injury may occur.
It may also cause failure to the device to be charged.
Do not use the product in a vehicle.
Otherwise, use of the product may affect devices such as a vehicle
antitheft system.
Do not bring the product close to any object vulnerable to magnetism.
Otherwise, an IC card, credit card or cash card, etc., may be affected
by magnetism and heat, resulting in permanent damage to such cards.
Remove a card inserted into the cover before using the product.
Disconnect the USB plug if the product will not be used for a long time.
Otherwise, failure may occur.
Compatible devices
3
This product can charge Qi compatible devices.
* Output is Max. 15W. Adjust the output according to the device to be charged.
* This product may not be used or may not charge completely depending on the
type of device to be charged.
* Qi is a registered trademark of the Wireless Power Consortium.
Name and function of each part
4
Main body
Charging part
Input terminal (USB Micro-B)
Do Not
Indication lamp (green/orange/red)
Standby: Green
During charge: Orange
Error indication: Red
Protective sheet
This sheet prevents abrasions on the surface of the main body and also serves as
a non-slip sheet for the device to be charged.
Attach this sheet to the main body if necessary.
5 Preparation
1. Prepare an AC adaptor for USB output.
* An AC adaptor is not included with the product.
Prepare an AC adaptor (2A or more) for USB output.
* If output exceeding 5W is required, prepare an AC adaptor for USB output
compatible with Quick Charge 2.0 or a higher version.
TM
* Quick Charge is a registered trademark of Qualcomm Incorporated.
2. Connect the USB cable.
Connect the USB Micro-B terminal on the main body and the AC adaptor with the
included power cable. When they are connected, the indication lamp lights up green.
USB-A USB Micro-B
Indication lamp
* Use only the included power cable.
* Confirm the direction of the terminal before inserting the power cable.
Inserting the terminal in the incorrect direction may result in breakage of the
terminal.