Selecting the Sound Mode
The "DUAL I-II" button displays/controls the processing and output of
the audio signal. When power is switched on, the mode is
automatically preset to either "Dual-I " or "Stereo", depending on the
current transmission.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM
Stereo
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
A2
Bilingual or Dual-I/II
Stereo
Stereo
➣
◆ If the receiving conditions deteriorate, listening will be easier
if the mode is set to the MONO.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the MONO.
◆ When receiving a mono sound in the AV mode,
connect to the "AUDIO (L)" input connector on the rear
panel.
On-screen indication
MONO (Normal use)
MONO ↔ MONO
NICAM
(Normal)
STEREO ↔ MONO
NICAM
(Normal)
Dual-I → Dual-II → MONO
NICAM
NICAM
(Normal)
MONO (Normal use)
DUAL-I ↔ DUAL-II
STEREO ↔ MONO
(Forced mono)
English-37