Media Play - Usb Device; Connecting A Usb Device - Samsung LE40B620R3W User Manual

Media Play - USB Device

Connecting a USB Device

1
Press the POWER button to turn the TV on.
2
Connect a USB device containing photo and/or music files to the USB jack on
the side of the TV.
3
When the Application selection screen is displayed, press the ENTERE
button to select Media Play (USB).
■ MTP (Media Transfer Protocol) is not supported.
■ The file system only supports FAT16/32 (The NTFS file system is not supported).
■ Certain types of USB Digital camera and audio devices may not be compatible with this TV.
■ Media Play only supports the USB Mass Storage Class device (MSC). MSC is a Mass Storage Class Bulk-Only Transport device.
Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported.)
■ Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB compatibility
problem.
■ Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not
responsible for any data file damage or data loss.
■ Do not disconnect the USB device while it is loading.
■ The sequential JPEG format is supported.
■ The higher the resolution of the image, the longer it takes to display on the screen.
■ The maximum supported JPEG resolution is 15360X8640 pixels.
■ For unsupported or corrupted files, the 'Not Supported File Format' message is displayed.
■ MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a
technology that supports the creation of content, the distribution and management of the content in an integrated and comprehensive
way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well
as managing billings and settlements.
■ When moving to a photo, loading may take a few seconds. At this point, the loading icon will appear at the screen.
■ If more than one MSC device is connected, some of them may not be recognized.
If a device requires high power (more than 500mA or 5V), the USB device may not be supported.
■ If an over-power warning message is displayed while you are connecting or using a USB device, the device may not be recognized or
may malfunction.
TV Side Panel
USB Drive
Photo
SUM
861MB/994MBFree
Photo Music Setup
Move Enter Return