L
D
T
ittfinski
aten
echnik (
Operating Instruction
Connection Cable (1m)
for the s88-feedback bus and the light controls
Light@Night and Light-DEC
from the Digital-Professional-Series!
Kabel s88 1m
Kabel Light@Night 1m
The interference protected twisted connection cable
of 1 meter length can be used for:
extending the installation distance of all LDT s88
⇒
components or directly to the command station /
interface or to each other (for RM-88-N, RM-88-N-O,
RM-GB-8-N only).
connecting s88 feedback module from Märklin /
⇒
Viessmann directly together at a distance of 1 meter
or extend the installation at 1 meter distance each.
connecting the Light-Display and Light-Power
⇒
Module of the light control Light@Night and
Light-DEC to each other.
This product is not a toy! Not suitable for children under 14 years of age! The kit
contains small parts, which should be kept away from children under 3 years of age!
Improper use will imply danger of injuring due to sharp edges and tips! Please store
this instruction carefully.
Introduction / Safety Information:
You have purchased a connection cable for your digital model
railway.
The connection cable is a high quality product which is supplied
within the assortment of Littfinski DatenTechnik (LDT).
We are wishing you having a good time using this product.
The connection cable comes with a 24 month warranty.
• Please read the following instructions carefully. Warranty will
expire due to damages caused by disregarding the operating
instructions. LDT will also not be liable for any consequential
damage caused by improper use or installation.
• Attention: Please switch off your model railway by
disconnecting the transformers from AC-current before
starting any installation.
Description for Kabel s88:
The connection cable consists of a 1 meter twisted bus cable with
two original s88 pin socket connectors. At one socket is a pin-pin
plug inserted.
Stiftleiste
rosa
pin plug
pink
If you want to use the s88 connection cable for connection of the
feedback module RM-88-N, RM-88-N-O or RM-GB-8-N you
have to remove at first the pin-pin plug.
Attach now one socket in that position onto the 6-poles pin bar
of the feedback module that the single white wire corresponds
with white marking at the pin bar.
LDT
)
000106
Part-No.:
000106
Part-No.:
1 m
rosa
pink
Please attend to the marking at the pin bar "OUT" and "IN" in
accordance to the operation instruction of the feedback module.
BU1
ST1
ST2
s88-N
OUT
OUT
weiß
Attach the second pin-socket of the bus-cable directly to the
digital central unit or to the interface respectively to an other
feedback module within the feedback line.
If you want to use the
s88 connection cable
for
connecting
two
Märklin or Viessmann
feedback
module
together please remove
first the pin-plug.
Insert the
pin-socket
connectors
of
the
connection cable into
the feedback module
that
the
cable
is
directed to the bottom.
To assure a constant
orientation
has
the
white single wire to be
located
into
the
direction to the middle
of the feedback module.
The following draft shows an assembled s88 connection cable
shown from the left side.
d e c o d e r s 8 8
rosa
pink
If you want to extend the
s88 bus-connection of the
LDT
former
feedback
module RM-DEC-88(-O) or
RM-GB-8 by 1m please
leave the pin-pin plug bar
inserted
at
the
socket
connector.
The
right
side
draft
indicates how to extend the
75cm s88 bus-cable of a
feedback
module
RM-
DEC-88 by 1 meters.
Attend
to
the
correct
orientation
of
the
bus
connectors to assure that
the cable colors of the
single wires correspond
exactly.
8-fach Rückmeldemodul
mit Gleisbesetztmeldern
BU2
8-fold feedback module
s88-N
with occupancy detectors
RM-GB-8-N
IN
Rev. 1.1
IN
8
7
6
5
4
3
2
1
märklin
digital
d e c o d e r s 8 8
9
10
11
12
13
14
15
16
weiss
white
Verbindungskabel
1 m
connection cable
weiss
white
8
7
6
5
4
3
2
1
märklin
digital
d e c o d e r s 8 8
9
10
11
12
13
14
15
16
rosa
pink
Digital-Profi werden!
Rückmeldemodul
RM-DEC-88
16 Rückmeldeeingänge für den
s88-Rückmeldebus.
Littfinski DatenTechnik (LDT)
www.ldt-infocenter.com
Rueckmeldedecoder RM-DEC-88
16-channel feedback modul
Rev. 3.0
Peter Littfinski DatenTechnik
OUT
IN
weiss
white
Stiftleiste 6 pol.
pin-pin plug 6 poles
weiss
white
Verbindungskabel
connection cable
Need help?
Do you have a question about the 000106 and is the answer not in the manual?
Questions and answers