Pretorian Environ Remote Instructions Manual

Pretorian Environ Remote Instructions Manual

Scanning remote control
Hide thumbs Also See for Environ Remote:

Advertisement

Quick Links

Pack Contents
Carefully check the contents
of the box, which are:
EnvirON Remote
Universal wall adapter
Configuration chart
These instructions
EnvirON Remote is a handheld or mountable remote
control which forms part of the innovative EnvirON
range of Environmental Controls. The unit may be used
with any combination of EnvirON receivers, typically
EnvirON Hub, iClick or Environ Connect, to control the
user's surroundings.
Because EnvirON Remote is a wireless device it does
not suffer from the directional behaviour of infra-red
based systems, allowing the user the freedom to place
the remote in any position and at any angle to achieve
the most comfortable and practical configuration.
EnvirON Hub then converts the wireless signals from
EnvirON Remote to infra-red.
Each of the eight touch sensitive buttons may be
configured to work with any receiver to achieve any
combination of wireless and infra-red functions.
Multiple buttons may also be grouped together for
use with a single receiver, making programming very
straightforward. The function of each button may be
configured using the built-in display.
For users who may have difficulty using the touch
buttons, two 3.5mm sockets on the rear of the unit
allow one or two-switch scanning to be used instead.
INSTRUCTIONS
Scanning Remote Control
Product Description
The unit has a built in rechargeable lithium-ion battery
to provide several days of use between charges, or it
may be permanently powered from a supplied wall
adapter or from a wheelchair auxiliary power port.
Each of the eight buttons may be marked with a pen
or with suitable self-adhesive labels to indicate their
functions.
When used in conjunction with the EnvirON App for
iPhone and iPad, the EnvirON range of products can
be used to control almost any electrical appliance
including TVs, audio equipment, lamps, kitchen
appliances, door, window and curtain openers and
electrical locks.
EnvirON Remote is packed with features to make life
easier and more rewarding for users. To get the most
from this range of products, please take the time to
read this manual. Pretorian also recommends that
the instructional videos on its website be accessed
and the EnvirON Configuration Guide be read prior to
configuring an EnvirON system.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Environ Remote and is the answer not in the manual?

Questions and answers

Summary of Contents for Pretorian Environ Remote

  • Page 1 Each of the eight buttons may be marked with a pen user’s surroundings. or with suitable self-adhesive labels to indicate their Because EnvirON Remote is a wireless device it does functions. not suffer from the directional behaviour of infra-red When used in conjunction with the EnvirON App for...
  • Page 2 Features • Eight programmable, touch-sensitive buttons. • Can be paired with multiple EnvirON receivers to control multiple appliances. • Can control wireless and infra-red* devices. • Does not need to be in line of sight of infra-red devices. • Single or two-switch scanning option. •...
  • Page 3 Plug the connector on the controls are always controlled via Environ end of the lead into the charging socket on the rear of EnvirON Remote [10] and the Connect. By writing these in the ‘Via’ column, charging LED [4] will light. The charging LED...
  • Page 4 In this case Timed 10 seconds may be EnvirON Remote and then touch button 8. appropriate, which is Function 6 using the table Once pairing has taken place, the flashing LED given in the EnvirON Connect instructions.
  • Page 5 Step 4. Decide on the function of buttons for this, press the Function button [7] on the rear infra-red devices. of EnvirON Remote once. The green LED [2] adjacent to touch button 1 lights and the (You can skip this step if you only have wireless devices).
  • Page 6: Learn Mode

    Pretorian for assistance. Learn Mode Learn Mode allows you to configure some additional settings on your EnvirON Remote. There are five settings in all and the default settings will be suitable for most users, meaning that you may not need to change any of the settings.
  • Page 7 Learn Mode 3- Single-Switch Scanning Dwell Time. Learn Mode 5- Enable Low Power Mode. LED adjacent to touch sensor 3 lights. LED adjacent to touch sensor 5 lights. When single-switch scanning is used, this This setting determines whether the unit enters setting defines the dwell time after the last a low-power mode after a period of non-use, in operation before scanning resumes.
  • Page 8 1 and 2 on the rear of the unit. Any type of switch may be used- for example conventional switches such as the Smoothie from Pretorian or squeeze switches, pillow switches, sip/puff switches etc. Any switch which terminates in a 3.5mm jack plug will work.
  • Page 9: Battery Charging

    To wake the unit again, press any button or any external switch. Warranty EnvirON Remote is warranted against defects in manufacturing and component failure. The unit is designed for use in domestic, educational, healthcare and commercial applications. Use outside of these areas will invalidate the warranty.
  • Page 10: Troubleshooting

    The following table lists some common problems. In addition, there are a series of informative videos on how to set up the EnvirON product range on Pretorian Technologies’ website. Please use the following QR code, or navigate to the EnvirON Remote product page.
  • Page 11 Notes...
  • Page 12 Unit 37 Corringham Road Industrial Estate Gainsborough Lincolnshire DN21 1QB UK Tel +44 (0) 1427 678990 Fax +44 (0) 1427 678992 EnvirON is a registered trademark of Pretorian Technologies Ltd S040113 www.pretorianuk.com Refers to firmware version 82.0 onwards.

This manual is also suitable for:

Ptremote

Table of Contents