Verifying The Installation - ITech IT9000 Installation Instruction

4.
5.

2.6 Verifying the Installation

After the installation finished, click Start\All Programs\Itech\IT9000 and then
click on the IT9000 Run Program to start it.
If you've selected the option "Create a Desktop Shortcut" during installation,
you may also run the software by directly clicking on the desktop shortcut
created.
The IT9000 main page is shown as below.
Click "Next" to install.
After the installation finished, click "Finish".
Copyright © Itech Electronic Co., Ltd.
Installing Software
17