Summary of Contents for Fujitsu DynaMO MCM3 AP Series
DynaMO Quick Install Card Unpacking Your DynaMO kits: 1 MCM3xxxAP/SS or 1 MCJ3xxxAP/SS Drive 1 frame kit with brackets, bezel and retaining clip (PLEASE USE ONLY THE 8 METRIC SIZED SCREWS, THIN TREAD, INCLUDED) 1 Magneto-Optical Media; capacity depends on drive model. 1 IDE cable or 1 SCSI cable 1 Power cable 1 DynaMO CD-ROM with installation software and drivers...
Configure Jumper Settings For IDE Drives (MCM3xxxAP and MCJ3xxxAP): 1. Jumper settings at factory shipping CNH5 CNH5 : Short 5-6 short-circuited: Sets the master device. 3. Setting slave device mode 2. Setting master device mode CNH5 CNH5 Slave device setting. Shows the setting for recognizing Master device setting.
This manual is also suitable for:
Dynamo mcm3 ss seriesDynamo mcj3 ap seriesDynamo mcj3 ss series