Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Thermor bios atmosphere 2.0
Summary of Contents for Thermor bios atmosphere 2.0
- Page 1 atmosphere Jumbo Weather Monitor Moniteur Météorologique Géant Instruction Manual / Mode d’emploi...
- Page 2 Thank you for purchasing the BIOS Atmosphere 2.0 Jumbo Weather Monitor Front View: Back View:...
- Page 3 Jumbo Weather Monitor Instruction Manual Monitor Front A. Wind Speed B. Time and Date C. Alarm D. Radio Controlled clock with auto DST E. Tide Indicator F. Sunrise and Sunset G. Heat Index / Wind chill H. Wind Direction Wind Gust J.
- Page 4 Make sure that you position the wind sensor in a free, open area that is not protected by objects, which may distort or interfere with the wind (e.g. large buildings, trees, chimney, etc.). NOTE: The following contents have been included with your BIOS Atmosphere 2.0 for mounting the wind sensor: • 2 x U-bolts to secure to a mast • 8 x washers...
- Page 5 Cable Preparation for Vertical Mounting 1. Run the cable that is already fastened to the wind sensor through the vertical joining section (see right). 2. Run the cable through the extension pole but do not secure the pole to any sections yet. 3.
- Page 6 MOUNT WITH “N” FACING NORTH: For accurate readings , it is important to mount the wind sensor so that the “N” (north) on the casing is facing the correct direction (north). If necessary, use a standard compass to determine north. 1. Make sure that the wind vane can rotate freely before fastening the unit permanently. 2.
- Page 7 • Press “°C /°F” button to select indoor & outdoor temperature in Celsius or Fahrenheit mode. • Press the “°C /°F” button on the rear of the BIOS Atmosphere 2.0 remote sensor, inside the battery compartment, to select the temperature to be displayed in Celsius or Fahrenheit mode • If the temperature is out of the measurable range, LL.L (beyond the minimum temperature)
- Page 8 8.0 Time and Alarm Setting 8.1 Radio Controlled Clock: • After batteries are inserted and the Bios Atmosphere 2.0 finishes receiving the transmission from the outdoor sensor, the clock automatically starts to scan the WWVB time signal and the Radio Control Icon flashes. Initial set up may take several minutes to synchronize.
- Page 9 Dispose of old, defective batteries in an environmentally friendly manner in accordance with the relevant legislation. IMPORTANT: Warning! The BIOS Atmosphere 2.0 and the outside sensors contain sensitive electronic components. Radio waves transmitted e.g. from mobile telephones, walkie talkies, radios, WiFi, remote controls or microwaves may influence the transmission distance of the weather station and the outside sensor and lead to a shorter reception range.
- Page 10 the devices which send out radio waves. We do not guarantee the maximum specified transmission range between the weather station and the outside sensors due to the radio frequency interference in the environment. 13.0 Product Specifications Indoor Temperature: -10°C to 50°C (14°F to 122°F) Outdoor Temperature: -50°C to 70°C (-58°F to 158°F) Temperature Resolution: 0.1°C Indoor & Outdoor Humidity: 20% - 99% RH Humidity Resolution: 1% RH...
- Page 11 Please include proof of purchase, your full name, address, daytime phone number or email address. This warranty does not apply if the defect or malfunction is a result of user abuse, misuse, alteration, modification or damages in transit. Thermor Ltd. 16975 Leslie Street Newmarket, ON L3Y 9A1 www.biosbrands.com...
Need help?
Do you have a question about the bios atmosphere 2.0 and is the answer not in the manual?
Questions and answers