Advertisement
Liquid ingredient measurement: The liquid measure feature is suitable for all water- based liquids, including wine,
milk, stock, cream etc. Note: Oils have a lower specific gravity, which will result in a volume reading of
approximately +10%. If measuring oils by volume on this scale, please adjust for this accordingly.
TARE OPERATION
You may wish to weigh ingredients in a bowl or other container (not included). In this case, you will need to tare
(zero out), or offset, the weight of the bowl so that only the weight of the ingredients is displayed.
1. Choose a container that will safely balance on the platform without tipping or falling. Do not use a heavy
container, as this might reduce the maximum capacity of the scale.
2. Press " " to turn the scale on. The scale will show "
3. Place the empty container on the scale platform and the weight will display.
inches for 2 seconds over the "TOUCHLESS TARE" sensors on the scale platform. The scale beeps and
then resets to zero.
4. Add the ingredient to be weighed. The weight of the ingredient alone will display.
5. The weight of additional ingredients may be zero-ed out as well. For example, if a recipe calls for ½ lb
rice and ½ lb beans, place the rice into the bowl. Once the correct amount of rice is weighed, wave
your hand within 2 inches for 2 seconds over the "TOUCHLESS TARE" sensors on the scale platform.
The scale beeps and then resets to zero. Add the ½ lbs of beans. Both ingredients have been
accurately weighed in the same bowl.
6. When weights have been zero-ed out, the display will show a negative number when the items are
removed from the scale. To reset the scale back to zero for a new measurement,
inches for 2 seconds over the "TOUCHLESS TARE" symbol on the scale platform. The scale beeps and
then resets to zero.
Note: If the "TARE" button illuminates on the scale, this indicates the weight of the bowl or container that is
zero-ed out is more than 1 lb 1.6 oz /500 grams /500 mL/17.6 fl oz. The scale will operate, but the capacity
may be reduced by the weight of the bowl or container. Please use a lighter weight bowl or container if
needed.
DISABLE TOUCHLESS TARE FEATURE
You may wish to turn off the "TOUCHLESS TARE" feature and use only the buttons to tare out a weight. To
disable the "TOUCHLESS TARE" feature:
1. Turn scale on and wait for the display to show zero. The scale will automatically default to the
"TOUCHLESS TARE" feature the first time the scale powers on.
2. Press and hold the "UNIT" button for 2 seconds. The scale will beep to indicate that you are in manual
tare mode. The "TOUCHLESS TARE" feature is now disabled.
3. The " " button will function as the "TARE" button. Press " " to tare (zero) out a weight.
4. Press and hold " " for 3 seconds to turn the scale off. The next time the scale is turned on, the
"TOUCHLESS TARE" feature will default to the last setting. Repeat the above process to enable the
"TOUCHLESS TARE" feature if desired.
PRECAUTIONS & DISPLAY MESSAGES
1. Clean exposed parts with a soft, slightly damp cloth. This scale meets IPX7 Waterproof requirements,
so this entire unit can be washed down with water. This allows for easy cleaning and high sanitary
conditions. Do not immerse in water for longer than 30 minutes. Before washing the scale, be certain
the USB port rubber plug is securely pushed into the USB port. Failure to do so may result in water
entering the scale and cause permanent damage. Avoid contact with acids, such as citrus juices.
2. Do not tamper with the scale's internal components. The scale contains no user-serviceable parts.
" and then zero.
Wave your hand within 2
wave your hand within 2
Advertisement
