RCA 25801 User Manual page 2

FCC RF Radiation Exposure Statement
T his equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operated in conjunction with
any other antenna or transmitter."
For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with the belt clip supplied with this product.
Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
Licensing
Licensed under US Patent 6,427,009.
Hearing Aid Compatibility
This telephone system meets FCC standards for Hearing Aid Compatibility.
Parts Checklist
Make sure your package includes the following items:
System Installation:
Important Installation Guidelines
• Install telephone near both a network jack and an electrical power outlet.
• Avoid sources of noise, such as a window by a busy street, and electrical noise, such as motors, microwave ovens, and fluorescent lighting.
• Avoid heat sources, such as heating air ducts, heating appliances, radiators, and direct sunlight.
• Avoid areas of excessive moisture or extremely low temperature.
• Avoid dusty locations.
• Avoid other cordless telephones
CAUTION: Always disconnect all phone cords from the base unit before battery installation or replacement.
IMPORTANT: Before you setup your phone, please make sure that your network system includes one RCA 25801 Digital Router. The telephone
lines should be connected to the 25801 Digital Router only, with the 25825 base unit linked to the 25801 with the network line.
The RCA 8-line phone system works by using your office's computer network to connect a system of phones to one another and a digital router. If your
office already has multiple computers connected to the internet, you already have the infrastructure you need and your RCA 8-Line phone system will
be right at home.
Connecting your RCA 25801 Digital Router:
1. Connect one of the included phone cords to your digital router's line jacks (numbered 1-8) for each phone line in your office.
2. Connect the other end of end of each phone cord to the corresponding phone jack in your office.
3. Connect one end of the Ethernet cable to the Ethernet port on the left side of the front panel of the digital router.
4. Connect the other end of the Ethernet cable to an open port on your office internet router, switch or wall jack.
5. Connect the included AC/DC adapter to the port on the rear panel of the Digital Router and plug the adapter into the wall outlet.
25801 Digital Router
Telephone Jacks
Back of 25825
Internet Router
Please see 25825 for complete 8-line system setup.
Service
If trouble is experienced with this equipment, for repair or warranty information, please contact customer service at 1-800-511-3180. If the
equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is
resolved.
This product may be serviced only by the manufacturer or its authorized service agents. Changes or modifications not expressly approved by Telefield
NA Inc. could void the user's authority to operate this product. For instructions on how to obtain service, refer to the warranty included in this guide
or call customer service at 1-800-511-3180.
Or refer inquires to:
Telefield NA Inc.
Manager, Consumer Relations
4915 SW Griffith Dr. #205
Beaverton, Or 97005
Attach your sales receipt to the booklet for future reference or jot down the date this product was purchased or received as a gift. This information
will be valuable if service should be required during the warranty period.
Purchase date ________________________________________________
Name of store ________________________________________________
Warranty
Limited Warranty
What your warranty covers:
• Defects in materials or workmanship
For how long after your purchase:
• Two years, from date of purchase
What we will do:
• Provide you with a replacement unit. The exchange unit is under warranty for the remainder of
the original product's warranty period.
How you get service:
• Locate your proof of purchase in the form of a bill of sale or receipted invoice which is evidence
that the product is within the warranty period. Proof of warranty eligibility is required and must be presented to obtain warranty service.