Related Manuals for Reverso AFP-210
Summary of Contents for Reverso AFP-210
- Page 1 Manual AFP-210 Shown with optional enclosure and stand Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882...
-
Page 2: Table Of Contents
Table of Contents System Overview................3 Control Panel Overview ..............4 Technical Specifications ..............5 Primary Inspection, Installation, & Electrical Installation ....6 Piping Installation ................7 Initial Setup ..................8 Digital Timer Instructions: Set Date and Time ........9 Digital Timer Instructions: Set Schedule Timer ........ -
Page 3: System Overview
Hinged cover - covers pump and outlet 2 micron filter 10. Spill sensor 11. Drip pan 12. Pump 13. Service switch 14. Outlet 15. Emergency stop button - with enclosure option only Enclosure Version Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882... -
Page 4: Control Panel Overview
12. Up key 13. Right key 14. Down key 15. OK key Digital Timer 16. Escape key 11 12 13 M - W - F - - MTWTFSS 11:00 15:00 Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882... -
Page 5: Technical Specifications
The system has been developed to be used with diesel fuel only, DO NOT USE WITH GASOLINE. • The system is designed to meet environmental standards for safe operation (NOT for use with fluids that have a flash point below 100°F (38°C), e. g.: Gasoline, alcohol,...) Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882... -
Page 6: Primary Inspection, Installation, & Electrical Installation
NORMAL OPEN NORMAL OPEN STEADY CLOSED STEADY CLOSED IN ALARM IN ALARM NORMALLY OPEN NORMALLY OPEN INTERMITTENT INTERMITTENT IN ALARM IN ALARM Power Power Supply Supply 220 Volt Configuration Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882 Dry Contacts... -
Page 7: Piping Installation
IN port. For optimal performance, ensure that the inlet Accumulated Sludge (suction) line(s) is free and nothing is Water restricting flow. Flow In Flow Out Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882... -
Page 8: Initial Setup
The emergency stop button is located on the right side of the enclosure, if equipped. Turn clockwise and press down to shut down the operation. Press the reset button. Then press the start button to resume operation. Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882... -
Page 9: Digital Timer Instructions: Set Date And Time
Now shown is the current time screen. Press UP current time screen. key to return to program screen. Set Clock S/W Time.. Th 19:35 2012-01-26 Sync Stop Set Param Set.. Prg Name MTWTFSS MTWTFSS 11:00 15:00 Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882... -
Page 10: Digital Timer Instructions: Set Schedule Timer
Every 5 seconds, screen will request user to push Afterwards, every 5 seconds screen will indicate the Start button to activate pogram. schedule timer is active. To Activate Automatic Push the Timer Start Active Button Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882... -
Page 11: Digital Timer Instructions: Set Manual Timer
In the screen shown below, the system is set to run for ESC to save. Flashing underline will disappear. 20 minutes and will stop once the time has expired. Manual Manual CURR CURR 00:00 00:00 20:00 20:00 Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882... -
Page 12: Digital Timer: Alarms
High Water Alarm DRAIN BOWL HI-VAC High Vacuum Alarm BACK FLUSH FILTER Backflushing procedure can be executed up to 5 times before replacing the filter element. HI-PRESS Hi Pressure Alarm Check Discharge Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882... -
Page 13: Backflushing Instructions
If necessary, repeat step 4 and 5. Prime the filter and close Open fuel supply valve. the bleed screw (refer to Technical Specifications for torque values). Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882... -
Page 14: Filter Element Replacement
(refer to and check for leaks. Technical Specifications for torque values). Replacement Filter Element Element # Description 01810 10 Micron 01830 30 Micron (Standard) 01860S 60 Micron (Stainless Steel) Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882... -
Page 15: Troubleshooting
Check service switch is in the ON position ( - ) Pump leaks fuel • Loose pump plumbing fittings • Worn pump shaft seal • Excessive heat from over head storage tank • Worn pump 0-rings or seals Version 2/8/13 Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882...
Need help?
Do you have a question about the AFP-210 and is the answer not in the manual?
Questions and answers