Equipment And Printing Instructions - multicomp MC-I20 User Manual & Troubleshooting

MC-I20 User Manual & Troubleshooting

Equipment and Printing Instructions

1. Prepare before printing
a. Connect the power supply, turn on the switch (connect the main switch at the power cord and the sub switch on the side of
the machine), and install the rack
b. Feed (Note: 1, preheated nozzle before the feeding, click "Prepare" ☞ "Preheat pla", until the temperature is heated to the
specified temperature, the consumable are sent to the feed gear, select " change filament ""loading")
Preheat the nozzle before feeding and retreating, quickly pull out the filament after the filament is withdrawn, otherwise the
filament will block the nozzle.
www.element14.com
www.farnell.com
www.newark.com
Page <10> 18/06/18 V1.1