Advertisement
Quick Links
Part number SP3016
99.5 -2003 Jetta/Golf with ALH
TDI turbo diesel engine
2004-2005.5 Jetta/Golf PD BEW
TDI Turbo diesel engine
1- 2 - pc. intake pipes
1- 2.5" Injen filter
1- 2.75" straight hose
1- TT intake hose
4-
040 Clamps
2- M4
button head screw
1- M6 vibra-mount
1- M6 flange nuts
1- M6 washers
1- 11/2" X 1/4 alum. coupler
1- 6"-6mm vac hose
1- 4 page instruction
Note: All parts and accessories now
sold on-line at :
"injenonline.com"
Figure 1
Warning: Manufactures attempting to duplicate Injen's
1- Calibration Method for Air Intake Tracts for Internal Combustion Engines.
2- Calibration Device for Air Intake Tracts for Internal Combustion Engines.
3- Calibration Method and Device for Air Intake Tracts having Air Fusion Inserts
Congratulations! You have just purchased the best engineered,
dyno-proven cold air intake system available.
Please check the contents of this box immediately.
Report any defective or missing parts to the Authorized Injen
Technology dealer you purchased this product from.
Before installing any parts of this system, please read the instructions
thoroughly. If you have any questions regarding installation please
(#1012)
contact the dealer you purchased this product from.
(#3043)
Installation DOES require some mechanical skills. A qualified
(#3046)
mechanic is always recommended.
(#4003)
*Do not attempt to install the intake system while the engine is hot.
The installation may require removal of radiator fluid line that may
(#6072)
be hot.
(#6020)
Injen Technology offers a limited lifetime warranty to the original
(#6002)
purchaser against defects in materials and workmanship. Warranty
(#6010)
claims must be handled through the dealer from which the item was
purchased.
Injen Technology 285 Pioneer Place Pomona, CA 91768 USA
Please check the contents of this box immediately.
Note: This intake system was Dyno-tested with an Injen filter and
Injen parts. The use of any other filter or part will void the
warranty and CARB exemption number.
Parts and accessories are available on line at "Injenonline.com
Note: Injen strongly recommends that this system be installed by a
professional mechanic.
"The World's First Tuned air Intake System!"
Factory safe air/fuel ratio's for Optimum performance
"At Injen Technology, we didn't copy the step down process, we
patented process will now face legal action.
MR Technology Step down process:
MR Technology
Patent# 7,359,795
Now equipped with "Air Fusion" Patent pending
invented it!"
Figure 2
Covered under Patent# 7,359,795
Published and patent pending
Published and patent pending
Advertisement
Summary of Contents for injen SP3016
- Page 1 1- 4 page instruction Note: This intake system was Dyno-tested with an Injen filter and Note: All parts and accessories now Injen parts. The use of any other filter or part will void the sold on-line at : warranty and CARB exemption number.
- Page 2 #1 with horn #2. mounted onto horn #2. This will allow room for place- Figure B:Use a T20 torx driver to loosen two torx ment of the Injen filter screws from MAF sensor to air box cleaner Page 2 of Part# SP3072...
- Page 3 Air duct Figure 17 Figure 16 Figure 15 Figure A: Pulll the MAF sensor housing out of the air Now lift the entire air box cleaner out of the engine Figure A: On the right side of the battery, locate the box cleaner.
- Page 4 5. Check the filter for excessive dirt build up. Clean or replace the filter with an original Injen filter (can be bought on-line at “injenonline.com”). Congratulations! You have just completed the installation of the best intake system sold on the market.
Need help?
Do you have a question about the SP3016 and is the answer not in the manual?
Questions and answers