Table of Contents
Advertisement
3. Press <Options> and select End calls → Held
call to end the call on hold.
4. To end the current call, press [
Using the speakerphone feature
Use the phone as a speakerphone to talk and listen
with the phone a short distance away.
Press [Centre] and then <Yes> to activate the
speakerphone feature. Press the key again to switch
back to the earpiece.
Using In-call options
Press <Options> to access the following options
during a call:
•
Speaker on?/Normal: turn on the speakerphone
feature or switch back to Normal mode.
•
Switch to headset/Switch to phone: switch the
call to a Bluetooth headset or hands-free car kit or
back to the phone. To use this feature, you first
need to connect your headset to the phone.
p. 79
•
•
].
•
•
•
•
•
•
•
New call: make a new call.
Mute/Unmute: switch off the phone's microphone
so that the other person on the phone cannot hear
you, or switch it back on.
Phonebook: access the contact list.
Add to phonebook: add the other person's phone
number to Phonebook.
Create message: create a new SMS message.
Send DTMF: send DTMF (Dual tone multi-
frequency) tones as a group. The DTMF tones are
the tones used in phones for tone dialling,
sounding when you press the number keys. This
option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
Memo: create a memo.
End call: disconnect the call currently on hold,
active call, or all calls.
Transfer: transfer the currently active call to a
caller on hold. The two callers can talk to each
other, but you are disconnected from the call.
29
Advertisement
Table of Contents
