Table of Contents
Advertisement
Get started
First steps to operating your phone
USIM/SIM card information
When you subscribe to a cellular network, you
receive a plug-in SIM (Subscriber Identity Module)
card loaded with your subscription details, such as
your PIN and available optional services. For 3G
services, you can purchase a USIM (Universal
Subscriber Identity Module) card.
Install and charge the phone
Remove the battery.
1
If the phone is already
on, first turn it off by
holding [
].
Insert the USIM/SIM
2
card.
Make sure that the
gold-coloured contacts
on the card face down
into the phone.
Install the battery.
3
Plug the charger into a standard AC wall outlet.
5
The LED on the charger indicates the charging
progress.
• Red: the battery is being charged.
• Green: the battery is completely charged.
• Orange: the battery is not correctly installed
or is operating at a too high or too low
temperature.
When the phone is completely charged (green
6
charger LED), unplug the charger from the
power outlet.
Plug the travel
4
charger into the
phone.
7
Advertisement
Table of Contents
