AQ-Tron BAT/48346 User Manual

MANUAL

General Safety Guide:

Read owner's manual entirely & carefully. Please also read your vehicle's user
manual to make sure there are no specific precautions you should be aware of.

Use in a well ventilated area.
Please wear safety equipment, including safety glasses and gloves. Car batteries

produce explosive gases that can cause damages.

Do not submerge in water or put into fire. Do not connect clamps together, or
create a short circuit. And do not open the unit.

Never connect a 12V unit to a 24V vehicle or charger, and vice versa.
Charging DC jack: 12V input for 12V models, and 24V input for 24V models for

supplied charger adaptor. Do not use other accessories.

We recommend pre charging your start booster before use.

How to recharge it?

If your Batteryless Start booster has an On/Off switch, make sure it is

in Position OFF before starting the charge or connecting the clamps to
the battery or vehicle. Then once everything connected turn it ON.
Recharge by supplied Charger adaptor is recommended

1. Pre charge it at home with the supplied charger only. Plug in the charger adaptor
into DC Jack plug and start recharging. During this process please keep always
the Main ON/OFF Switch on the OFF Position.
2. Recharge by external battery, connect the two clamps of the batteryless booster
on almost any charged battery of the same voltage and turn the Main ON/OFF
Switch to the ON Position.
3. Recharge by running vehicle engine, connect the booster clamps in correct
sequences on a running vehicle's terminals and turn the Main ON/OFF Switch on
the ON Position.
Make sure the unit is fully charged before using it: 5 LEDs lights must be ON, or
voltage must be higher than 13.5V.

If your batteryless start booster is equipped with an ON/OFF switch or 12/24V
Cam switch, please make sure it is on the position ON, or switch the connector on

the correct voltage after connecting the clamps correctly. This charging method
is applied to only recharging by external battery and by running vehicle
If your unit is equipped with a safety fuse, please make sure the fuse is not
engine.
damaged; otherwise the current will not go through while recharging the unit

through the clamps by an external battery or by a running vehicle engine.
www.aqtron.com - info@aqtron.com
USER MANUAL
BATTERYLESS START BOOSTERS
BAT/48346
Make su
How to us
If you c
Always

If your

is on th

then tu
selectin
starting
If your
loud no

The Battry
it charged
battery. It w
1. Turn of
Before Jum
2. Make s
engaged
3. Connec
4. Then T
first the
T
Warranty
Unit is co
cover abu
Manufactu
under any
price of t
directly.
Plea
recy
faci
batt
use
man
env
®