Operation Guidelines; Operation; Troubleshooting - Lasko LP200 Instruction Manual

ÍNDICE
Advertencias .................................................................................................. 9
Especificaciones del producto ................................................................ 10
Descripción del filtro ................................................................................... 10
Instalación del filtro ..................................................................................... 10
Pautas de operación ................................................................................... 11
Operacion ....................................................................................................... 11
Solución de problemas .............................................................................. 11
Garantía y Servicio al Cliente ................................................................... 12
NEW 6/20 8 LP200_LP300ES

OPERATION GUIDELINES

• Keep curtains and loose objects away from rear intake.
• Always operate unit on a stable surface with the cord routed away from foot traffic.
• Please observe extreme caution when using this Air Purifier in the proximity of children.
• Do not operate the Air Purifier without Filters.
• Do not use in bathrooms, laundry areas or other damp indoor environments. Keep away from water at all times.

OPERATION

The LP200 is engineered to effectively clean small to medium-sized rooms in your home. For maximum per-
formance, make sure to close windows and doors in the room you are purifying.
1. Plug the unit into a working 120V power source.
2. Intuitive operation makes this a very easy-to-use device. Lightly tap any function to select.
Controls
Power Button
Press Button to turn Air Purifier ON and OFF.
Note that the purified air will exit the right-hand side of the body.
Fan Speed
Press Button to cycle through: 1 - Low, 2 – Medium, 3 - High.
Auto-Off Timer
This function will automatically shut off the Purifier after a certain period of
time. To engage, repeatedly press Button until the desired hour intervals are
illuminated. The Timer is adjustable up to 8 hours. To discontinue, press Button
until all LEDs under the hour marks are extinguished.
Filter Replacement Reminders
When the LED above the power button blinks RED it is time to replace the
Activated Carbon Filter, the True HEPA Filter, or both. To reset the Filter
Replacement Reminder press the Power and Timer button together for 3
seconds. The LED should blink 3 times and turn off. The unit run timer has
now been reset.
Troubleshooting Guide
Please review page 4 for proper Filter sequence. It is important to
How do I install the Filters install the Filters in the correct order, and routinely replace your
Filters as recommended.
The Air Purifier is running but The buttons detect human touch. If you are pressing the buttons
I can't change the settings with a glove or foreign object, the controls may not respond.
The fused plug is a safety device and may have been activated. If
The Air Purifier is plugged
so, please contact customer service. Do not attempt to replace or
in but nothing works
bypass this feature.
Dirty/Dusty Exterior Wipe with mild detergent and soft rag.
NEW 6/20
5
LP200_LP300ES