Table of Contents
Advertisement
Dialling a number by voice
1. Access the Voice commands menu, or
press [C] in Idle mode to activate voice
recognition.
2. At the voice prompt, say "Call."
3. Say a name or phone number.
Speak into the microphone for best results.
4. When the phone asks for confirmation, say
"Yes" to confirm the name or number.
5. You can also use one of the following
commands:
• No to skip to another name or number.
• Repeat to start over with another
command.
• Cancel to end the voice recognition.
6. Say the number type you want if the name
has more than one number.
Accessing features
1. Access the Voice commands menu, or
press [C] in Idle mode to activate voice
recognition.
2. At the voice prompt, say one of the following
commands:
• Send SMS: send an SMS message.
• Lookup: access contact details.
You can quickly access this function by
pressing and holding the right soft key in
Idle mode.
• Go To: access a menu.
• Check: check the signal status,
remaining battery power, and your phone
number.
3. Follow the corresponding menu procedure.
61
Advertisement
Table of Contents
