Page 1
The current software version on which your device is running will be displayed when moving your mouse cursor over the AUDAC logo in the upper left corner of the web-based user interface.
Page 2
At the settings screen, press the ‘LCD configuration’ button At the LCD configuration screen, hold the “Update software” button for 3 seconds...
Page 3
The update screen appears and the system starts updating. The led at the back of the display print flashes fast. When finished updating, the LCD restarts and a login screen appears.
Page 4
The led flashes slow. Check the software version by pressing the AUDAC logo in the GUI. Disconnect Power from the M2 Remove the USB stick and close the housing. The software is updated...
Need help?
Do you have a question about the M2DIS and is the answer not in the manual?
Questions and answers