Getting Started; Restrictor Cap Settings - Levoit LV110WP Manual

G E T T I N G S TA R T E D
1. Remove all packaging from the
water pitcher and filter cartridge.
2. Remove the restrictor caps from the
bottom of the filter.
Figure 1.1
3. Soak the filter cartridge in clean tap
water (submerged completely) for
15 minutes.
NOTE:
There may be carbon dust in the
water while rinsing or soaking the filter. This
is normal.
4. Rinse the filter cartridge thoroughly
for 10 seconds under running water.
[Figure 1.1]
5. Replace the restrictor caps on the
bottom of the filter.

Restrictor Cap Settings

• Place the restrictor cap in the "+"
position if you want water to filter
faster, or in the "-" position if you
want water to filter more thoroughly.
[Figure 1.2]
• You can remove the caps
completely if you want water to filter
as fast as possible.
+ position
Figure 1.2
– position
EN
7