Table of Contents
Advertisement
Quick Links
2000/3000 WATT ELECTRIC START DIGITAL PORTABLE
INVERTER GENERATOR
ITEM #65064 & #65065
OWNER'S MANUAL AND SAFETY INSTRUCTIONS
SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE
PRODUCT'S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM
(OR MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).
FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: (909) 628 4900 MON-FRI 9AM TO 3PM PST
Advertisement
Table of Contents
Related Manuals for Stark 65064
Summary of Contents for Stark 65064
- Page 1 2000/3000 WATT ELECTRIC START DIGITAL PORTABLE INVERTER GENERATOR ITEM #65064 & #65065 OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION GENERAL SAFETY WARNINGS Read and thoroughly understand all instructions and safety information before assembling or operating this log splitter. Failure to do so may cause serious injury or death. Do not allow anyone to operate this inverter generator who has not read and understood this manual. - Page 3 IMPORTANT SAFETY INFORMATION Never use a generator indoors, including in garages, basements, crawl spaces and sheds. Opening doors and windows or using fans will NOT prevent carbon monoxide build up in the home. When using generators, keep them outdoors and far away from open doors, windows, and vents to avoid toxic levels of carbon monoxide from building up indoors.
- Page 4 IMPORTANT SAFETY INFORMATION Only use a suitable means of transport and lifting devices with sufficient weight bearing capacity when transporting the generator. Secure the generator on transport vehicles to prevent it from rolling, slipping, and tilting. Industrial applications must follow OSHA requirements. Do not leave the generator unattended when it is running.
-
Page 5: Service Precautions
IMPORTANT SAFETY INFORMATION SERVICE PRECAUTIONS Before service, maintenance, or cleaning: A. Unplug all devices from the generator. B. Turn the Combination Switch C. to its “OFF” position. C. Allow the engine to completely cool. D. Then, remove the spark plug cap Keep all safety guards in place and in proper working order. -
Page 6: Components And Controls
COMPONENTS AND CONTROLS... -
Page 7: Control Functions
CONTROL FUNCTIONS OIL WARNING LIGHT: When the oil level falls below recommended levels, the oil warning light lights up and the engine will automatically stop. Refill with oil to get the engine to start again. If the engine stalls or doesn’t start, turn the engine switch to “ON” and pull the recoil starter. If the oil indicator light flickers, the engine oil is insufficient, add oil and restart. - Page 8 CONTROL FUNCTIONS FUEL TANK CAP: Remove the fuel tank cap by turning it counter-clockwise. FUEL TANK CAP AIR VENT KNOB: The fuel tank cap features an air vent knob to stop fuel flow. The air vent knob must be turned to ON. This will allow fuel to flow to the carburettor and the engine to run.
-
Page 9: Pre-Start Check
PRE-START CHECKS Inspect the engine and generator looking for damaged, loose and missing parts before set up and starting. If any problems are found, do not use the equipment until it is properly fixed. The condition of the generator is the owner’s responsibility. Vital components can start to deteriorate quickly and unexpectedly, even if the generator is unused. -
Page 10: Operation
OPERATION 1. Turn the ECS black switch to OFF 2. Turn the air vent knob to ON 3. Turn the fuel knob to ON 4. Turn the red engine switch to ON 5. Pull the choke know out fully TIP: The choke knob is not required to start a warm engine, push the choke knob back in into the original position. - Page 11 OPERATION TIP: When starting the engine, with the ECS ON, and there is no load on the generator: In ambient temperature below 0 °C (32 °F), the engine will run at the rated r/min (4500r/min) for five minutes to warm up the engine. In ambient temperature below 5 °C (41 °F), the engine will run at the rated r/min (4500r/min) for three minutes to warm up the engine.
-
Page 12: Alternating Current (Ac) Connection
ALTERNATING CURRENT (AC) CONNECTION BE SURE ANY ELECTRIC DEVICES ARE TURNED OFF BEFORE PLUGGING THEM IN NOTICE Be sure all electric devices including the lines and plug connections are in good condition before connecting to the generator. Be sure the total load is within generator rated output. Be sure the receptacle load current is within receptacle rated current. - Page 13 BATTERY CHARGING NOTICE Be sure the ECS is turned off while changing the battery. Be sure the connect the red battery charger lead to the positive (+) battery terminal and connect the black lead to the negative (-) battery terminal. DO NOT reverse these positions. Connect the battery charger leads to the battery terminals securely so that they are not disconnected due to engine vibration or other disturbances.
-
Page 14: Maintenance
ALTERNATING CURRENT (AC) CONNECTION When using the generator, make sure the total load is within rated output of a generator. Otherwise, generator damage may occur. TIP: Application wattage indicates when each device is used by itself. The simultaneous usage of AC and DC power is possible but total wattage should not exceed the rated output. - Page 15 MAINTENANCE NOTICE If the gasoline engine frequently works under high temperatures or heavy loads, change the oil every 25 hours. If the engine frequently works under dusty circumstances, clean the air filter element every 10 hours. If necessary, change the air filter element every 25 hours. Some electrical appliances or general purpose electric motors have high starting currents and cannot be used, even if they lie within the supply ranges given in the above table.
-
Page 16: Spark Plug Inspection
SPARK PLUG INSPECTION The spark plug are important components that should be checked periodically. 1. Remove the cap and spark plug cap and insert the tool through the hole from the outside cover. 2. Insert the handlebar into the tool and turn it counter-clockwise to remove the spark plug. 3. -
Page 17: Air Filter
AIR FILTER 1. Remove the screws (1) and then remove the cover (2). 2. Remove the screw (3) and then remove the air filter case cover (4) 3. Remove the foam element, wash it in solvent and dry it. 4. Oil the foam element and squeeze out excess oil. The element should not be dripping. -
Page 18: Fuel Tank Filter
FUEL TANK FILTER Never use gasoline while smoking or in the vicinity of an open flame. 1. Remove the fuel tank cap filter. 2. Clean the filter with gasoline. 3. Wipe the filter and install it. 4. Install the fuel tank cap Be sure it is tightened securely. FUEL TANK FILTER 1. -
Page 19: Troubleshooting
ENGINE Perform these steps to protect the cylinder, piston ring etc., from corrosion 1. Remove the spark plug and pour about one tablespoon of SAE 10W-30 into the spark plug hole, then reinstall the spark plug. Recoil start the engine by turning over several times to coal the cylinder walls with oil. - Page 20 TROUBLESHOOTING...
-
Page 21: Specifications
SPECIFICATIONS WIRING DIAGRAM... -
Page 22: Please Read The Following Carefully
PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Need help?
Do you have a question about the 65064 and is the answer not in the manual?
Questions and answers