Advertisement
Available languages
Available languages
User Manual
Installation
Please see the steps below to successfully install this product.
•
Set the RF rotary dial on the back of each receiver to the same channel using a small, flat head
screwdriver.
•
Connect a transceiver to a USB port on either an AV device, or USB charger close to the device you
wish to control.
•
Insert the 3.5mm IR emitter cable to the IR emitter port on the transceiver and place the emitter in
direct line of sight of the IR port on the device you want to control.
•
Connect a transceiver to a USB port on either an AV device or USB charger in a convenient location
no further than 150m (492.12ft) away from the transceiver located by the device to be controlled.
•
Insert the 3.5mm IR receiver cable to the IR receiver port on the transceiver and place the receiver in
a direct line of sight of the IR remote control or smart home IR hubs IR port.
Installation is now complete.
Operation
Alternative configurations
When creating one to many configurations to control multiple devices from one position, install further
transceivers close to each device you wish to control, connect an extra IR emitter cable to the IR emitter
port on each transceiver and place each emitter in direct line of sight of the IR ports on each device.
When creating many to many configurations, simply add further transceivers to convenient locations and
an extra IR receiver cable to each one. Ensure each transceiver is set to the same RF channel using the
rotary dial.
Radio Frequency Channels
Each transceiver unit has an integrated radio frequency rotary dial on the back of the unit with a total of
10 channels (0-9). This is helpful in creating multiple connections in a limited space by alternating which
RF channel is in use.
English
Advertisement
