Bearer: select a bearer to be used for each type of
network address accessed; GPRS or Data.
The remaining options depend on the Bearer
setting.
When the bearer is set to GPRS:
IP address: enter the WAP gateway address
required to connect to the Internet.
User name: enter the User ID required to connect
to the GPRS network.
Password: enter the password required to connect
to the GPRS network.
APN: enter the access point name used for the
address of the GPRS network gateway.
When the bearer is set to Data:
IP address: enter the WAP gateway address
required to connect to the Internet.
Login name: enter the PPP server login ID.
Password: enter the PPP server password.
Dial-up number: enter the PPP server phone
number.
Data call type: select a data call type; Analogue
or ISDN.
Note: The WAP browser settings may vary,
depending on the service provider. Contact
your service provider for further details.
Funbox
123