La Hacienda 56177 User Instructions

Steel firepit

Download this manual

Steel Firepit

User Instructions - Please keep for future reference

WARNING

IMPORTANT – Carefully remove any packaging before use, but retain the safety instructions.

These instructions form part of the product.

Please take note of all of the safety warnings listed in these instructions.

Please read these instructions in their entirety and retain them for future reference.

These instructions should be stored with the product.

This product is for domestic use ONLY and should not be used commercially or for contract purposes.

If you have damaged or missing parts, call the La Hacienda customer helpline: 03451 306192

CARBON M ONOXIDE

H AZARD

Danger of carbon

monoxide poisoning -

NEVER light this product

or let it smoulder or cool

down in confined spaces

Produced in China for La Hacienda Ltd

Hangar 27, Site C, Aston Down Airﬁeld, Nr Stroud, Glos, GL6 8HR, UK

Tools required (not included)

Tools list

www.lahacienda.co.uk

56177

304/5000

Page 1 This product is for domestic use ONLY and should not be used commercially or for contract purposes. Produced in China for La Hacienda Ltd Hangar 27, Site C, Aston Down Airﬁeld, Nr Stroud, Glos, GL6 8HR, UK If you have damaged or missing parts, call the La Hacienda customer helpline: 03451 306192 www.lahacienda.co.uk...
Page 2 When not in use, and if stored outside, cover the product once it has cooled completely with a weatherproof cover. • Remove loose paint and rust with a wire brush when needed and re-paint the product using La Hacienda High Temperature Paint.
Page 3 Parts list 7 (1x) 4 (1x) 1 (1x) 2 (1x) 5 (1x) A (3x) M6x70mm Bolt 6 (1x) 3 (1x) B (3x) Wing Nut Prior to assembly, read the instructions carefully. Check all parts against the parts list. Carry out assembly on a soft surface to avoid scratching the paint. Please retain this information for future reference. For ease of assembly only loosely tighten bolts and then tighten fully when assembly is complete.
Page 4 Assembly instructions IMPORTANT - Remove any packaging before use, but retain the safety instructions and store them with this product. ASSEMBLY STEP 1 - Connect firepit (4), middle section (5) and the base (6) with 3x M6 x 70mm bolts (A) and 3x wing nuts (B) STEP 2 - Place log grate (3) into the firepit (4).

304/5000