Chemicals. This regulates the manufacture, placing on the market and use of chemical substances in preparations, under ® certain conditions also pertaining to substances in products. mayr power transmission exclusively manufactures products (articles: clutches/couplings, electric motors, brakes and the appropriate rectifiers) in accordance with the , Sizes 2 –...
Guarantee DIN VDE 0580 Electromagnetic devices and The guarantee conditions correspond with components, general specifications the Chr. Mayr GmbH + Co. KG sales and delivery 2014/35/EU Low Voltage Directive conditions. ® Mistakes or deficiencies are to be reported to mayr...
Page 6
Fig. 4 of the hand release Grounding strand Coil cable Fig. 5 27/08/2020 TK/TL/GC/SU Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Phone: +49 8341 804-0, Fax: +49 8341 804-421 Page 6 of 17 www.mayr.com, E-Mail: public.mayr@mayr.de...
Bushing Cap screw M6 x 16 1) Bolt (6.4) must be ordered separately if required. 27/08/2020 TK/TL/GC/SU Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Phone: +49 8341 804-0, Fax: +49 8341 804-421 Page 8 of 17 www.mayr.com, E-Mail:...
Page 9
Size 63.7 31.5 52.5 The tolerance for dimension “T1” is ±2.5 mm. 27/08/2020 TK/TL/GC/SU Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Phone: +49 8341 804-0, Fax: +49 8341 804-421 Page 9 of 17 www.mayr.com, E-Mail: public.mayr@mayr.de...
Page 10
Holding voltage Overexcitation voltage The switching times are dependent on the respective spring pressure. 27/08/2020 TK/TL/GC/SU Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Phone: +49 8341 804-0, Fax: +49 8341 804-421 Page 10 of 17 www.mayr.com, E-Mail:...
However, this component is of 710 Nm. subject to ageing dependent on the application ® 4. Remove the auxiliary device and the bolt (6.4 / mayr article or operating conditions (torque adjustment, number 8277826) for releasing the brake. switching frequency, ambient conditions, 5.
A sufficient number of emergency releases is possible (approx. 1000 x). Fig. 10 Depicted in the unreleased neutral position 27/08/2020 TK/TL/GC/SU Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Phone: +49 8341 804-0, Fax: +49 8341 804-421 Page 13 of 17 www.mayr.com, E-Mail:...
Depending on the application, the switching contact can also be voltage, as the current then increases more quickly. Once the ® protected by other protection circuits (e.g. mayr -spark brake is released, it needs to be switched over to the nominal ®...
Do not inhale brake dust. In case of dust formation, a dust mask FFP 2 is recommended. 27/08/2020 TK/TL/GC/SU Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Phone: +49 8341 804-0, Fax: +49 8341 804-421 Page 16 of 17 www.mayr.com, E-Mail:...
® mayr , or for damage resulting from the use of these products. 27/08/2020 TK/TL/GC/SU Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Phone: +49 8341 804-0, Fax: +49 8341 804-421 Page 17 of 17 www.mayr.com, E-Mail:...
Need help?
Do you have a question about the ROBA-diskstop 894.5 Series and is the answer not in the manual?
Questions and answers