CITROEN C2 Manual page 32

I N S T R U M E N T PA N E L L I G H T I N G –
A
Lighting rheostat
The dimmer is active when the
lamps are on and affects:
• The instrument panel:
counter, fuel level display.
• The display screen.
• The air conditioning
panel.
Selection of mode and brightness
is done by pressing the dimmer
button A on the instrument panel.
Night driving (headlamps on)
Black panel.
Adjustment is by successive
presses on button A in the follow-
ing cycle:
Black panel.
B L A C K PA N E L
B
D
This function is to give you the best
possible visual conditions for driv-
C
ing at night.
In black panel mode, the following
information only will be displayed
temporarily, should you request it
or in the event of an alert:
• The warning lamps in zone C
(bottom area of the instrument
Rev
panel) will come on in the event
of an alert: e.g. fuel low, coolant
temperature.
control
• The direction indicator warning
lamps.
• The speed indicator.
• The gear engaged.
• The mileage recorder each time
you press button B.
• The automatic air conditioning
display each time you press
one of the buttons.
• The trip computer information.
level 1
Night driving
•
"DARK" places the display on
standby. Only the time and the
temperature remain visible at
the top of the screen.
• A second press on D switches
the screen and the instrument
panel off (black panel) with the
exception of information con-
cerning for example:
- The speed indicator.
- The gearbox.
- Cruise control / Speed limiter
if this has been activated.
Note: Timed lighting of func-
tions if you:
- Press any of the display con-
trols.
- Select Radio-CD.
- Operate any of the air condi-
tioning controls.
Note: All the displays come on
if there is an alert.
• A third press on D returns you
to normal lighting.
D
II