Blaupunkt Comfort 930 Instruction Manual page 66

5. Carefully mark the position of buttonhole on your
garment.
6. Place the fabric under the foot. Pull out the bobbin
thread underneath the fabric to a length of about 4
inches to the rear
.
7. Align the buttonhole mark on the fabric with the
mark on the buttonhole foot, and then lower the
buttonhole foot.
8. While holding the top thread, start the machine.
* Sewing will be completed automatically in the following order.
Fabric marking
9. When sewing is finished, use a buttonhole
opener/seamripper to open up the fabric in the center
of the buttonhole. Be careful not to cut any of the
stitching.
28
1 2 3
1 2 3
Fabric marking
Mark
4 5 6
4 5 6
Buttonhole foot
alignment position
7
7 8