Summary of Contents for Space Television Arris Space Connect VAP4641
- Page 1 WI-FI Mesh poInt Arris Space Connect VAP4641 Advanced Setup www.spacetv.co.za Helpline: 0861 40 41 42...
- Page 2 Space Television reserves the right to change the specifications of the hardware and software described in these manuals at any time. Space Television cannot be held liable for any damages resulting from the use of this product. Specifications are subject to change without notice.
-
Page 3: Table Of Contents
HOw tO Set tHe HOme netwOrK OperatiOnaL mOde HOw tO Setup meSH netwOrKing HOw tO cHange tHe Static ip addreSS Of tHe arriS Space cOnnect vap4641 HOw tO cHecK tHe firmware verSiOn HOw tO reSet YOur cOnfiguratiOn tO defauLt SettingS... -
Page 4: Access Point Mode
Connect your Arris Space Connect VAP4641 to your home gateway with an Ethernet cable. • Power up your Arris Space Connect VAP4641 using the power switch located on the right side of the casing wait for the Led located on the front side to become solid state on. -
Page 5: Wireless Extender Mode - Manual Setup
Prerequisite: • Do not connect the Arris Space Connect VAP4641 to yourgateway through Ethernet • Connect your laptop to the Web User Interface of the Arris Space Connect VAP4641 (see section 7) • From your laptop, with your favorite browser, select the menu WiFi Settings/ Backhaul •... -
Page 6: Updating Ssid And Password
- wpS puSH ButtOn prOcedure Prerequisite • The Arris Space Connect VAP4641 is up and running and the LED is displaying solid Green, blinking green/amber or solid amber • You are now able to associate your smartphones, tablets and laptops to one of the Arris Space... -
Page 7: How To Manually Fix Operational Mode
- manuaL Setup Prerequisite: • The white printed label located on the back side of the Arris Space Connect VAP4641 displays the SSid names of its 5 gHz and 2.4 gHz band access points • ARRIS-abcd • ARRIS-24G-abcd where abcd are different for each unit •... -
Page 8: How To Set The Home Network Operational Mode
It is possible to change the Home Network operational mode from the GUI • Use section 7 to access the Arris Space Connect VAP4641 GUI under advanced setting • Select the menu Advanced Settings / Network (or Other Settings / network) •... -
Page 9: How To Check The Firmware Version
The static IP address of the Arris Space Connect VAP4641 is by default 192.168.1.253 • Use section 7 to access the Arris Space Connect VAP4641 GUI under admin or support menu • Select the menu Advanced Settings / Network (or Other Settings / network) •... -
Page 10: How To Reset Your Configuration To Default Settings
The unit will restart booting with the default factory settings cOnditiOnS Of warrantY Space television warrants the product as being free from defects in material and workmanship for a period of 12 months starting from the date of purchase indicated on it. See note below. - Page 11 VAP4641 Wireless Mesh Point Advanced Setup - Arris Space Connect VAP4641 tecHnicaL SpecificatiOnS wireless Characteristics management 4x4 5GHz 802.11ac ARRIS ECO Agent TR-069 compliant management client 2x2 2.4GHz 802.11n ARRIS ECO Envoy USP compliant management 4 Spatial Streams client MU-MIMO...
- Page 12 VAP4641 Wireless Mesh Point Advanced Setup - Arris Space Connect VAP4641 SafetY inStructiOnS read these instructions carefully before connecting the unit To prevent fire, short circuit or shock hazard: • Do not expose the unit to rain or moisture. •...
- Page 13 VAP4641 Wireless Mesh Point Advanced Setup - Arris Space Connect VAP4641 federaL cOmmunicatiOn cOmmiSSiOn interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 14 Helpline: 0861 40 41 42 www.spacetv.co.za...
Need help?
Do you have a question about the Arris Space Connect VAP4641 and is the answer not in the manual?
Questions and answers