Subscribe to Our Youtube Channel
Related Manuals for Rockler Chrome Summit Pen
Summary of Contents for Rockler Chrome Summit Pen
- Page 1 Chrome Summit Pen Kit Instructions Effective December 2018 Review full manual instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most recent manual version for your product.
- Page 2 This product is designed only for specific applications as defined in the instructions and should not be modified or used for any manner not described in these instructions. Use only recommended accessories. Before using the Chrome Summit Pen Kit: READ, UNDERSTAND and FOLLOW ALL INSTRUCTIONS AND SAFETY WARNINGS.
- Page 3 Upper Tube (Short) Lower Tube (Long) Mandrel Center Band 10.3mm 10.3mm 10.8mm 9.1mm 3/16" Tenon Stepped Bushing Summit Bushings Mandrel Setup Blank Preparation 1. Cut the blanks about 1/8” longer than the Brass Tubes to allow for blowout or hole elongation. Maintain grain orientation of the two blanks for turning by drawing a line lengthwise across the cut line.
- Page 4 Lower Tube (7), up to the Indentation Ring. To determine if the Twist Mechanism is positioned to the correct depth, thread Check Rockler.com for updates. If you have further questions, please the Ink Cartridge (8) into the Twist Mechanism. When the contact our Technical Support Department at 1-800-260-9663 Ink Cartridge is properly fitted, approximately 1/8”...
Need help?
Do you have a question about the Chrome Summit Pen and is the answer not in the manual?
Questions and answers